Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Kickstand Rest for Trolling Motor and Folding Mount

$20.00

Black anodized aluminum pad that sits under a trolling motor or folding mount kickstand to protect your deck carpet. Fastens with one #10 x 1 in. screw, which is included.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

This trolling motor kickstand rest is a small pad that sits on your deck where the kickstand lands, so the foot doesn’t grind through the carpet. It’s black anodized aluminum and fastens with a single #10 x 1 in. screw, which is included. It works under the kickstand of a trolling motor or a folding mount.

Why the carpet wears through

A kickstand puts the weight of the motor or mount on one small foot, in the same spot, every trip. Add sand, water and the boat pounding across a chop, and that foot slowly wears a hole in the boat carpet.

Once the carpet’s gone, the deck underneath takes the wear and stays wet. A metal pad gives the kickstand something hard to sit on, and the carpet around it stays intact.

Trolling motor kickstand rest specs

  • Material: black anodized aluminum
  • Fastening: one hole for a #10 x 1 in. long screw
  • Screw: included
  • Works under: trolling motor kickstands and folding mount kickstands
  • Job: protecting boat carpet at the kickstand foot

Fitting it

  1. Stow the motor, or fold the mount, the way you do on the water, and mark where the kickstand foot lands.
  2. Set the rest on the mark and check the foot sits fully on the pad, not half on the carpet.
  3. Drill a pilot hole for the #10 screw. On a wood or foam-cored deck, a dab of marine sealant in the hole keeps water out of the core.
  4. Drive the screw snug. Don’t crank it hard into soft decking.

Most bow-mounted trolling motors spend every run stowed, so the kickstand sits in that spot for hours. If yours has an unusually large or odd-shaped foot, email us a photo before ordering and we’ll check it against the pad.

Where it fits in your setup

A trolling motor kickstand rest is a small fix that pairs well with the rest of your bow hardware. Our folding mounts and our guide to trolling motor mounts, slides and stabilizers cover the bigger parts. Small parts like this one help an order reach free ground shipping, which starts at $199 to the lower 48 and DC.

Quick answers

Will the trolling motor kickstand rest fit under a folding graph mount?

It’s made for trolling motor kickstands and folding mount kickstands. Send us a photo of the foot if you want us to check.

Does it come with the screw?

Yes. The #10 x 1 in. screw is included.

Can I return it?

Yes, if it’s unused and within 30 days. It’s a non-electronic part, so our returns policy allows it.

For help with an unusual deck or kickstand, email sales@trollingmotorsdirect.org with your boat and your motor or mount, and we’ll sort it out with you.

Related products

error: Content is protected !!