Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Telescoping Short Swivel Single Mount

$413.00

Telescoping short swivel single mount for one graph. Swivels at the base for glare or position, telescopes for height, and the tube comes off the base. Fits all graphs except Helix 7. Deck hardware not included.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

The telescoping short swivel single mount carries one graph on a short telescoping tube that turns at the base. Raise it to fish, drop it for the run, and lift the tube off the base when you want the screen off the boat.

Why the short version

The telescoping swivel comes in two heights. The short one keeps a single screen lower, which suits a console, a smaller boat, or a spot where a tall mount would block your view of the water. It also leaves less sticking up to snag a cast, and the telescoping short swivel single mount is the easier fit where something sits overhead, like a bimini frame.

If you need more height, the telescoping swivel single monitor mount is the taller version of the same idea.

Three ways it adjusts

  • Swivel: the mount turns at the base to adjust for sun glare or position.
  • Height: the telescoping tube slides up and down.
  • Removal: the tube comes off the base, leaving the swivel base on the deck.

The gallery shows the telescoping short swivel single mount extended next to a ruler, so you can check the range against your own deck before ordering.

Graph fit

The mounting plates fit all graphs except the Helix 7. Garmin, Lowrance and Humminbird units other than that one go straight on; for the Helix 7, add the Helix 7 adapter bracket, sold separately.

Leave a loop of slack in the power and transducer cables at the base. A telescoping mount moves up and down as well as around, and a tight cable is the first thing to suffer.

Install notes

The mount is CNC machined aluminum with a black anodize finish, and every bolt is stainless steel Allen head. Deck mounting hardware isn’t included, so pick up stainless fasteners and bed each hole in marine sealant to keep water out of the deck core.

If you’d like a flat plate left on deck when the mount is off, the telescoping swivel bridge adaptor/deck plate fits the Telescoping Short Swivel base. It leaves only a 1/2-inch thick, 4-inch square plate behind, and it doubles as the adaptor for our bridges.

For a ready-made bridge setup, the bridge combo version bundles the mount, a bridge and the adaptor plate. The full range is under telescoping swivel mounts.

Questions

Can I take the telescoping short swivel single mount off the boat?

Yes. The telescoping tube comes off the base, so the graph and tube can go home with you.

Will it hold a Helix 7?

With the Helix 7 adapter bracket, yes.

Does it come with deck hardware?

No. The deck fasteners are up to you; use stainless.

For help choosing between short and tall, email sales@trollingmotorsdirect.org with your boat and where the mount will go.

Related products

error: Content is protected !!