Description
Bolt the swivel mount base adaptor assembly under one of our stationary mounts and that mount can turn, instead of pointing one direction for good. It fits our single console mount, single deck mount and double mounts.
Stationary mounts it converts
- Single console mount
- Single deck mount
- Double mounts
If you own one of those and wish it swiveled, this is the add-on. You keep the stationary mount you already have and add the swivel underneath.
What the swivel gets you
Turn the screens to get out of sun glare, or to see them better from the seat, the bow or the console. With two graphs on a double mount, a small turn can make both readable from where you’re standing.
The base also lets you remove your graphs with a twist of a knob. That makes it quick to pull them at the ramp and keep them out of sight when the boat sits in a lot overnight.
It works the same whatever brand sits on top. Garmin, Humminbird and Lowrance screens all go on our mount plates, and the swivel base doesn’t care which one you run.
Fitting it
- Take the graphs off and remove the stationary mount from the deck.
- Bolt the mount to the swivel mount base adaptor assembly on the bench.
- Set the assembly in place, check it turns without hitting anything, and mark the holes.
- Fasten it down with your own stainless hardware, then refit the graphs.
On a double mount with two big screens, check the knob is snug before each run so the mount stays seated.
Bridges and under plates
To set the swivel mount base adaptor assembly on one of our bridges, add the bridge adaptor plate, sold separately.
Deck mounting hardware isn’t included. On a thin or aluminum deck, an under plate spreads the load. Our Universal Under Plate lists the swivel base among the parts it fits.
Build
| Item | Detail |
|---|---|
| Material | CNC machined aluminum |
| Hardware | Stainless steel |
| Finish | Black anodize |
| Fits | Our single console, single deck and double mounts |
| Bridge use | Needs the bridge adaptor plate (sold separately) |
| Deck hardware | Not included |
| Made | USA |
Questions
Will the swivel mount base adaptor assembly fit a folding mount?
No. Folding mounts have their own folding swivel base adaptor.
Do I need anything else to mount it on a bridge?
Yes, the bridge adaptor plate. It’s a separate item.
Is deck hardware in the box?
No. Bring stainless fasteners sized for your deck. The swivel mount base adaptor assembly comes with stainless hardware, but not deck hardware.
See all our single mounts, or email sales@trollingmotorsdirect.org with your boat and current mount and we’ll confirm the fit.




















