Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Side Arm Mount

$335.00

Side arm graph mount with an 8″ arm and 360 degree adjustment at the arm-to-mount and arm-to-gimbal plate joints. Bridge and mounting hardware not included. Black and clear anodized aluminum, made in the USA.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

The side arm graph mount puts your screen on an 8-inch arm that adjusts a full 360 degrees at both joints. That gives you close to endless ways to place the graph around the bridge it sits on. The bridge itself is sold separately.

Two joints, full rotation at each

There are two places where this mount turns:

  • Arm to mount: the whole arm swings around its base, 360 degrees.
  • Arm to gimbal plate: the plate the graph sits on turns 360 degrees at the end of the arm.

Put those together and you can push the screen out to the side, pull it in tight, or angle it toward the driver’s seat. The gimbal plate is the flat plate your graph’s own bracket bolts to. The name comes from the gimbal, a pivoting support.

A side arm is handy when the spot right above the bridge is already taken, or when you want the screen off to one side so it doesn’t block your view of the water ahead of the trolling motor.

With this much movement, leave enough slack in the power and transducer cables for the arm to swing through its full range. Tie them along the arm so they can’t snag, then tighten each joint once you’ve found the spot.

What’s included and what isn’t

You get the arm mount with its stainless steel hardware. You’ll need standard Allen wrenches to put it together.

Two things aren’t in the box: the bridge and the mounting hardware. Plan for both before the boat goes in the water, and keep a set of Allen wrenches in the console so you can fine-tune it on the lake. The side arm graph mount is also set up so your graph comes off the boat easily for storage or trailering.

Pairing the side arm graph mount with a bridge

Because the mount needs a bridge, pick that first. Our bridge mounts come in several foot pedal spans and leg heights, and the standard Bridge Mount is where most people start.

This listing comes with the 8 inch arm only. If you need a different reach, look at our mount arms or ask us before ordering.

Build

  • Black and clear anodized aluminum
  • Stainless steel hardware
  • Standard Allen wrenches required
  • Made in the USA

Questions

Does the side arm graph mount come with a bridge?

No. The bridge is sold separately, and so is the hardware for mounting it.

How long is the arm?

It’s an 8 inch arm. Both joints rotate a full 360 degrees.

Which graphs fit the gimbal plate?

The listing doesn’t name brands for this one, so send us your graph model and we’ll confirm.

Email sales@trollingmotorsdirect.org with your boat, bridge and graph model and we’ll help you put the setup together.

Related products

error: Content is protected !!