Description
This over the side spy pole adaptor lets the side mount you already own carry a Garmin Spy Pole. It goes on where the vise used to be, so the base and the rest of the mount you’ve already rigged stay put. It’s made in the USA and sold as the adaptor alone.
Why hang Spy Pole off the side of the boat
Garmin designed Spy Pole to clip onto its Force and Force Pro trolling motors. Its spec sheet also lists deck and gunnel mounting, but both need extra accessories. If your bow carries a different brand of motor, or you’d rather keep the sonar off the trolling motor shaft, a gunnel mount is the straightforward fix.
That’s the job the over the side spy pole adaptor does. Take the vise off your Over the Side Mount, fit the adaptor in its place, and the mount is ready for the pole. You aren’t buying a whole second mount just to add Spy Pole. Garmin’s Spy Pole page has the pole itself.
What to have on hand first
- A side mount to fit it to. The adaptor replaces the vise; the mount isn’t in the box.
- A Garmin Spy Pole, also not included. Garmin builds it in 42 and 49 inch lengths.
- A solid spot for the mount base. If the boat has nothing yet, the deck plate or a gunnel rail plate are the usual starting points.
- A power run for the pole and a clean path for your LiveScope transducer cable back to the graph.
Rigging tips from the shop
Choose the location with the boat on the trailer and the pole in your hands. The pole needs room to turn without touching the hull, a locker lid or the trolling motor when it’s deployed. Stand where you actually fish and make sure you can still see the screen.
Spy Pole has adjustable shaft depth. Set it so the transducer stays wet when the boat rolls in a chop, then run the pole through its full rotation from the remote or chartplotter while you watch the cables. Leave enough slack that nothing pulls tight at either end of the sweep, and tie up the extra where it can’t catch a hook.
A side-mounted pole takes wakes and waves that a bow mount never sees, so check the knobs and hardware before each trip. A loose knob is easier to fix at the ramp than in the middle of the lake.
Questions
Does the over the side spy pole adaptor include the mount?
No. It’s the adaptor only, made to replace the vise on an Over the Side Mount you already own. If you’re starting from scratch, look at the complete Over the Side Mount for Garmin Spy Pole instead.
What will the pole carry once it’s mounted?
Spy Pole is built to hold LiveScope and Garmin’s GT360UHD 360-degree transducer, and this adaptor is meant for that kind of forward-facing sonar rig. The transducers are sold separately.
Can I send it back if my plans change?
Unused non-electronic items can come back within 30 days. The details are on our returns page, and the rest of our side mounts are in the over the side mounts category.
If you aren’t sure the over the side spy pole adaptor matches your mount, email sales@trollingmotorsdirect.org with your boat, your trolling motor and a photo of the mount, and we’ll check before you order.











