Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

MEGA 360 Ultrex Mounting Hardware kit

$297.00

Complete kit for mounting a Humminbird MEGA 360 to a Minn Kota Ultrex: low pro 360 mount, LP360 dog bone clamp and stainless steel hardware. The 360 mounts on the port side of the motor. 360 not included.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

Our MEGA 360 Ultrex mounting hardware kit has everything you need to put a Humminbird MEGA 360 on a Minn Kota Ultrex trolling motor. You get a low pro 360 mount, an LP360 dog bone clamp and stainless steel hardware, and the finished setup sits on the port side of the motor.

What comes in the box

PartNotes
Low pro 360 mountThe bracket that carries the 360 on the Ultrex
LP360 dog bone clampThe clamp that goes with the low pro mount
Stainless steel hardwareBolts for the install
Mounting sidePort side only

One gallery photo shows the mount beside a ruler, which is handy for checking clearance on your bow before it arrives. Spare clamps and brackets are in our MEGA 360 mounts section.

Planning a port side 360

Because the MEGA 360 Ultrex mounting hardware kit only goes on the port side, think about what else lives on that side of the motor. If you also run a Live Sweep or another transducer mount there, check for clearance first. We carry a Live Sweep Ultrex mount for the starboard side if something needs to move over.

Route the 360 cable back toward your graph with some slack at the motor. The Ultrex has to deploy, stow and steer, and a cable pulled tight will chafe or tug on the connector over time.

Installing the MEGA 360 Ultrex mounting hardware kit

Lay the parts out and compare them with the product photos before you start, so you know where each piece goes. A helper to hold the 360 while you start the bolts makes the job far easier than juggling it alone on the bow. Snug everything, deploy and stow the motor a few times at the dock, then go back over the bolts.

If you trailer long distances, add the MEGA 360 stabilizer bracket for Ultrex. It’s made for an Ultrex running the 360 bracket and keeps the unit from shaking on the road. For the sonar side of things, the MEGA 360 Imaging – Ultrex page on Minn Kota’s site, which now sells Humminbird’s sonar, covers the unit itself.

Quick answers

Does the MEGA 360 Ultrex mounting hardware kit fit the Ultrex Quest?

This kit is for the Ultrex. For a Quest, order the Ultrex Quest 360 mounting hardware, which is built for that motor.

Do I get the 360 with it?

No, only the mount, clamp and hardware. If you still need the unit, we sell the Humminbird MEGA 360 with no mount. Keep in mind that electronics are final sale in our shop.

Can I flip it to starboard?

No. It’s listed as port side only. Email us if your boat layout makes that a problem.

If your Ultrex model or year is in doubt, send the details to sales@trollingmotorsdirect.org with a photo of the bow and we’ll help you check the fit.

Related products

error: Content is protected !!