Description
Building an NMEA 2000 network from scratch takes six kinds of parts, and the Lowrance N2K-EXP-RD-2 starter kit has all of them: two terminators, two T-connectors, a 2 ft cable, a 15 ft cable and a power node. It’s sold for HDS displays and works with all of Lowrance’s red NMEA 2000 network parts.
What’s in the box
| Part | Lowrance number | Qty |
|---|---|---|
| Terminator, male | TR-120M-RD | 1 |
| Terminator, female | TR-120F-RD | 1 |
| T-connector | N2K-T-RD | 2 |
| Extension cable, 2 ft | N2KEXT-2RD | 1 |
| Extension cable, 15 ft | N2KEXT-15RD | 1 |
| Power node | N2K-PWR-RD | 1 |
Why a boat needs an NMEA 2000 backbone
NMEA 2000 is how marine electronics share small, steady streams of data: GPS position, heading, depth, water temp, engine and fuel readings. Instead of a wire from every sensor to every display, everything plugs into one shared cable called the backbone. Each device taps in through a T-connector, and the backbone also carries power to the devices on it (the NMEA 2000 article has the background).
Not sure your boat already has a network? Look behind the console for a row of small tees with a terminator at each end. If there’s nothing there, you’re starting fresh.
An HDS on its own doesn’t need a network. Add a Point-1 heading sensor, an engine interface or other NMEA 2000 sensors, and it does.
Laying out the Lowrance N2K-EXP-RD-2 starter kit
- Put a terminator on each end of the NMEA 2000 backbone. It needs exactly two, one at each end.
- Join the two tees with the 2 ft cable, or plug them straight together if the devices sit side by side.
- Connect the power node to one tee and wire it to a fused, switched 12 V source as Lowrance’s instructions show.
- Plug your display into the other tee.
- Use the 15 ft cable to reach a device farther away, or to stretch the backbone toward the bow or stern.
Two tees fill up fast, since one goes to power and one to the display. Every extra device needs its own N2K-T-RD tee, and longer runs can use the 25 ft extension.
Lowrance N2K-EXP-RD-2 starter kit questions
Do I need the power node if my display already has power?
Yes. The display’s power cord runs the display, not the network. The backbone needs its own feed, which is what the power node is for.
Where should the power node go?
On a short backbone, anywhere is fine. On a long one, feeding power near the middle helps keep voltage even at both ends.
Can I return it?
Network parts are electronics, which are final sale (see returns).
Send a list of the devices you want on the network to sales@trollingmotorsdirect.org and we’ll tell you what to add to the Lowrance N2K-EXP-RD-2 starter kit. The rest of our network parts are in Lowrance graph accessories.









