Description
Think of the Lowrance HDS16 PRO no transducer unit as the hub you build the rest of the boat around. It’s the 16-inch HDS PRO with C-MAP DISCOVER OnBoard charts for the US and Canada, sold without a transducer so you pick the sonar that suits your fishing. Lowrance’s part number is 000-16005-001.
One screen for the whole boat
Lowrance built the HDS PRO to control a lot more than sonar. From this screen you can run:
- Trolling motor: a Lowrance Ghost, including Ghost 360, Orbit Waypoint and Anchor at a Distance. MotorGuide Xi5 and Xi3 need the MotorGuide PinPoint Gateway.
- Anchors: Power-Pole shallow water anchors, from the touchscreen.
- Autopilot: NAC-1, NAC-2, NAC-3 and Lowrance Outboard Pilot.
- Radar and AIS: all HALO radars, with AIS targets overlaid on the chart and radar.
- Weather and audio: SiriusXM through the WM-4 module (USA only).
Lowrance’s HDS PRO page calls this bow-to-stern control, and on a 16-inch 1920 x 1080 screen there’s room to keep the chart up while you use it.
Ports and connections
| Connection | What the HDS16 PRO has |
|---|---|
| Ethernet | 2 x 100 Mbit, up to 6 displays per network |
| NMEA 2000 | 1 Micro-C port |
| NMEA 0183 | Through the power cable |
| Video in | HDMI 1.4 (HDCP), composite via adapter |
| Video out | None |
| Wireless | Wi-Fi b/g/n, Bluetooth 5.2 |
Picking the sonar
Built in, the unit handles dual-channel CHIRP, ActiveTarget 2 and Active Imaging HD. Add-on modules it supports include the S3100, S5100, StructureScan, StructureScan 3D and SonarHub. If you want FishReveal on SideScan, the S3100 is the module that adds it.
If you want one transducer to start with, the Active Imaging HD 3-in-1 covers CHIRP, DownScan and SideScan on its own. For live sonar, the ActiveTarget 2 system plugs straight in, and the Lowrance HDS16 PRO no transducer unit can run two of them.
Building the NMEA 2000 side
Radar overlay and steady chart orientation need a heading source. The Point-1 GPS antenna gives heading over NMEA 2000, and the N2K-EXP-RD-2 starter kit covers the backbone if the boat doesn’t have one yet.
Lowrance HDS16 PRO no transducer questions
Can I send the picture to a second screen?
Not by video. The HDS PRO has no video output. Add a second HDS PRO on Ethernet instead.
What fuse does it need?
Lowrance recommends a 5 A fuse. Typical draw is 3.0 A and max is 4.1 A at 13 V.
Can it be returned?
No. Electronics are final sale (see our returns page).
Planning a full system? Email sales@trollingmotorsdirect.org with your boat and the gear you want on it, and we’ll help you check the Lowrance HDS16 PRO no transducer unit ties it together. More sizes are in Lowrance graphs.













