Description
Fifteen feet is a useful middle length on most fishing boats, and the Lowrance ETHEXT-15YL Ethernet cable covers it. It’s the network cable that links a Lowrance display to another display, a sonar module, or other Ethernet gear somewhere else on the boat. If your old 15 ft Lowrance cable got pinched in a hatch or chewed up under the deck, this is a straight swap.
Same length as the ActiveTarget 2 cable
The ActiveTarget 2 system ships with a 15 ft (4.5 m) Ethernet cable to connect its module to the display. If you’re moving that module, adding a second display, or replacing a damaged cable, 15 ft is a length you already know works on your boat.
What runs over Lowrance Ethernet
- Display to display: Elite FS units share sonar, charts and waypoints over the network.
- Live sonar: the ActiveTarget module talks to the display over Ethernet.
- Radar: Elite FS displays drive Lowrance Halo radar domes directly.
- Other modules: Lowrance gear that uses the 5-pin Ethernet port found on displays like the Elite FS.
The Elite FS port is rated 100Base-T, which is the Fast Ethernet standard. It’s the link Lowrance built these displays to network over.
Planning a 15 ft run with the Lowrance ETHEXT-15YL Ethernet cable
Measure along the real route: through rod lockers, rigging tubes and under consoles, not in a straight line across the deck. Add slack at each end for displays on tilt or swivel mounts and a little extra for service loops. If you’re over about 15 ft, the 25 ft version is the safer buy.
On a typical bass boat, 15 ft often covers a console display to a module mounted in a side compartment, or a console screen to a second unit nearby. Bow to console usually takes longer. Shorter jobs suit the ETHEXT-6YL 6 ft cable.
Fitting tips
Push each plug of the Lowrance ETHEXT-15YL Ethernet cable in straight and hand-tighten the collar until it stops. Pull it through hull holes before you mount the device at each end, so you’re not wrestling with a connected cable. Keep the plugs off compartment floors where water collects, and avoid tight bends right at the connectors. Secure the cable along its run so it can’t chafe on sharp edges or moving hatches.
Find other lengths and network parts in our Lowrance graph accessories section. If you’re building a full ActiveTarget setup, the ActiveTarget 2 system includes one of these lengths in the box.
Questions
Can I join two network cables to make a longer run?
It’s better to buy one cable at the length you need. Every joint is another connection to keep dry and tight.
Is the Lowrance ETHEXT-15YL Ethernet cable returnable?
Electronics are final sale at our shop. Measure first and check our returns policy.
Email sales@trollingmotorsdirect.org with what you’re connecting and where each piece is mounted, and we’ll help you pick the length.









