Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Lowrance Elite FS 7 HDI Transducer C-Map Contour+

$864.99

Lowrance Elite FS 7 with C-MAP Contour+ and an HDI Skimmer 83/200/455/800 kHz transom transducer, part 000-15696-001. Sonar plus DownScan now, with ActiveTarget and Active Imaging support for later.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns
SKU: LOW00015696001
Category: , , ,

Description

The Lowrance Elite FS 7 HDI is the Elite FS 7 display bundled with an HDI Skimmer transducer: traditional sonar plus DownScan Imaging, without SideScan. Part 000-15696-001 comes with C-MAP Contour+ charts preloaded. It’s a good fit for anglers who mostly fish what’s under the boat and want room to add ActiveTarget or Active Imaging later.

Lowrance Elite FS 7 HDI product photo showing an Elite FS display

HDI vs Active Imaging: what you’re choosing

The HDI skimmer in this box runs 83/200 kHz for traditional sonar and 455/800 kHz for DownScan Imaging. That gives you fish arches, a clean bottom line and a picture-like view of structure straight below. What you don’t get is SideScan. If you want to see out to the sides, the Active Imaging 3-in-1 bundle is the one to look at.

The Lowrance Elite FS 7 HDI display itself supports ActiveTarget live sonar and the Active Imaging 3-in-1, so starting with HDI doesn’t lock you in.

What the Lowrance Elite FS 7 HDI box holds

  • Elite FS 7 display
  • Suncover
  • Mounting bracket and knobs
  • Power cable, fuse and fuse holder
  • HDI Skimmer transducer, 83/200/455/800 kHz

Networking, radar and boat control

The Elite FS 7 shares sonar, charts, waypoints and other data with other displays on the network, so it can be a bow unit that talks to your console screen. It supports and controls NMEA 2000 devices, drives Lowrance Halo radar domes directly, and gives full touchscreen control of Power-Pole anchors and the Ghost trolling motor. C-MAP Contour+ (AMER, APAC) is preloaded.

Specs

ItemRating
Screen7-inch multi-touch, 800 x 480, over 1,200 nits
Viewing angles50° top, 60° bottom, 70° left/right
Weight (display only)0.9 kg (1.9 lb)
Power12 V DC (10 to 17 V), 3 A fuse, 28 W max (2 A at 13.8 V)
WaterproofingIPX6 and IPX7
ConnectionsNMEA 2000 Micro-C, Ethernet 5-pin, 9-pin sonar, microSD/SDXC
Wireless and GPSWi-Fi 802.11b/g/n (no networking between units), Bluetooth 4.0, 10 Hz GPS
Compass safe distance0.5 m (1.6 ft)
TemperaturesOperating -15°C to +55°C; storage -20°C to +60°C

Setting up the HDI skimmer

Mount the transducer on the transom where water flows clean at speed, clear of strakes and out of prop wash, with the face at or just below the hull bottom. Route the cable to the 9-pin sonar port and fuse the power lead at the battery. If you ever need a spare, we sell a 9-pin HDI skimmer on its own. More displays are in our Lowrance graphs section, and the fishfinder entry on Wikipedia explains how sonar and down imaging differ.

Questions about the Lowrance Elite FS 7 HDI

Can I upgrade to SideScan later?

Yes. The display supports the Active Imaging 3-in-1, so you can swap transducers down the road.

Returns?

Electronics are final sale at our shop (returns policy).

Email sales@trollingmotorsdirect.org with your boat and how you fish, and we’ll help you choose between HDI and Active Imaging.

Related products

error: Content is protected !!