Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Lowrance Active Target 2 Module Only

$844.99

Lowrance ActiveTarget 2 module only, part 000-15961-001. It replaces the module that ships in the ActiveTarget 2 kit. No transducer included. Runs on 12 or 24 V DC.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

The Lowrance Active Target 2 module is the black box that sits between the ActiveTarget 2 transducer and your display. This listing is the module only, part 000-15961-001, sold as a replacement for the module that comes in the ActiveTarget 2 kit. If yours has failed, been damaged or gone missing, this gets your live sonar running again without buying a whole new system.

What’s included and what isn’t

You get the module. That’s it. There’s no transducer, and the listing doesn’t mention a power or Ethernet cable, so plan on reusing the ones already on your boat. In a complete ActiveTarget 2 kit those are a 4-pin power cable and a 15 ft (4.5 m) Ethernet cable.

Lowrance Active Target 2 module specs

SpecRating
Part number000-15961-001
Power supply12/24 V DC
Operating voltage10.8 to 31.2 V DC
Max current draw1.5 A at 13.8 V
Reverse polarity protectionYes
Waterproof ratingIP67
Weight1.86 kg (4.12 lb)
Operating temperature5°F to 131°F (-15°C to +55°C)
Storage temperature-22°F to 158°F (-30°C to +70°C)

One thing to watch: the fuse. Our supplier’s ActiveTarget 2 listing shows 5 A, while Lowrance’s current ActiveTarget 2 spec page lists 3 A. Go by the install guide that comes with your module and fuse it to match.

Swapping in the replacement module

Mount the Lowrance Active Target 2 module somewhere dry and ventilated, off the bilge floor, where you can still reach the plugs. The console or a dry storage locker works on most bass boats. Run power straight from the battery with the fuse close to the positive terminal, plug in the transducer cable and the Ethernet cable to the display, and tidy the runs so nothing hangs from a connector.

Because it runs on 12 or 24 V, you can feed it from your cranking or electronics battery, or a dedicated electronics supply. Check the polarity anyway; reverse polarity protection is a safety net, not a wiring plan.

Compatibility

ActiveTarget 2 works with HDS PRO, HDS LIVE and Elite FS, and Lowrance’s ActiveTarget 2 page adds HDS Carbon. The listing describes this as the replacement for the module in the ActiveTarget kit. It doesn’t say whether it pairs with a first-generation ActiveTarget transducer, so ask us before ordering for an older system.

The matching ActiveTarget 2 transducer and the full ActiveTarget 2 system are both in our Lowrance transducers section. Our forward facing sonar guide compares live sonar systems if you’re still deciding.

Questions about the Lowrance Active Target 2 module

Do I need a new transducer too?

Not if your ActiveTarget 2 transducer is fine. This replacement module works with the transducer already on your boat.

Can I return it?

Electronics are final sale at our shop. Read our returns policy and confirm your system before you order.

Email sales@trollingmotorsdirect.org with your display and the part number on your old module, and we’ll confirm this is the right one.

Related products

error: Content is protected !!