Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Live Sweep Ultrex Mounting Kit Port Side

$297.00

Port side Ultrex mount plus dog bone for putting a Live Sweep on the left side of a Minn Kota Ultrex. CNC machined aluminum, black powder coat, stainless hardware. Standard Allen wrenches required.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

A left side Live Sweep install on an Ultrex takes two machined parts, and the Live Sweep Ultrex port mounting kit has both: the port side mount and a dog bone. Each part is CNC machined aluminum with a black powder coat, held together with stainless steel hardware, and you’ll need standard Allen wrenches to install them.

Kit or bracket alone

We sell the port mount by itself too. Go that route only if you already have a dog bone in good shape from a previous setup. For a first install on this motor, or if your old parts are bent or chewed up, the kit saves you a second order.

Live Sweep Ultrex port mounting kit specs

ItemDetail
ContentsUltrex port side mount and dog bone
MaterialCNC machined aluminum
FinishBlack powder coat
HardwareStainless steel
ToolsStandard Allen wrenches, not included
FitsMinn Kota Ultrex, port side (the Ultrex Quest has its own kit)

Is port the right side for you

Port is a natural pick when your graph and cable runs are on that side of the boat, or when starboard is already spoken for. One thing to think through first: our MEGA 360 Ultrex hardware also mounts on port. If you plan to run a 360 on this Ultrex, the starboard kit leaves room for both. Walk the cable path from the bow to your console before deciding; the shorter, cleaner run is usually the better side.

First trip after the install

Once the Live Sweep Ultrex port mounting kit is on, take the boat out for a shakedown before a tournament or a long trip. Make a few runs at speed, then stop and go over every bolt; new parts can settle against each other and loosen slightly the first time. Look at the transducer cable where it passes the mount and the dog bone, and make sure nothing pinches or rubs when the motor stows.

If you’re still pairing a transducer with your graph, Humminbird’s MEGA Live compatibility list is worth checking, since Live Sweep carries Humminbird as well as Garmin and Lowrance live sonar. More parts are in our Live Sweep section.

Questions

Does the Live Sweep Ultrex port mounting kit include the Live Sweep?

No. It’s the mount and dog bone only, for a Live Sweep you already own or are buying separately.

Will it fit my Ultrex Quest?

No. The Quest has its own Ultrex Quest port kit.

What if it turns out to be the wrong side?

Unused non-electronic parts can be returned within 30 days under our returns policy.

Before you order, email sales@trollingmotorsdirect.org with your Ultrex model, shaft length and the graph you run, and we’ll confirm the fit.

Related products

error: Content is protected !!