Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Lowrance HDS9 Pro 9in MFD C-Map US & Canada Active Imaging HD 3In1

$1,939.99

A complete 9-inch Lowrance HDS PRO kit: the display, the Active Imaging HD 3-in-1 transducer and C-MAP DISCOVER OnBoard US and Canada charts preloaded. Model 000-15981-001.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

The Lowrance HDS PRO 9 with Active Imaging HD transducer is a full starting kit: a 9-inch HDS PRO display, the Active Imaging HD 3-in-1 transducer and C-MAP DISCOVER OnBoard charts for the US and Canada loaded on the unit. Lowrance’s model number is 000-15981-001. If you’re rigging a boat from scratch, it covers the screen, the sonar and the maps in one order.

What comes in the kit

  • The display: 9-inch SolarMAX HD touchscreen, 1280 x 720, readable through polarized glasses.
  • The transducer: Active Imaging HD 3-in-1, covering CHIRP sonar, DownScan Imaging and SideScan.
  • Charts: C-MAP DISCOVER OnBoard with 1-foot contours on 19,000+ US and 9,400+ Canadian lakes.

The supplier listing doesn’t itemize cables or mounting hardware. If you need those confirmed before you order, email us and we’ll check.

Placing the Active Imaging HD transducer

Most of what you’ll see on the Lowrance HDS PRO 9 with Active Imaging HD depends on where the transducer goes. SideScan needs a clear view to both sides, so the transducer has to sit below the hull line and away from anything that blocks the side beams, like a strake, a jack plate or the outboard’s lower unit. Turbulence is the other enemy: rivet lines and hull fittings ahead of the transducer throw bubbles that show up as streaks. Follow the angle setting in the install guide closely, since a few degrees of tilt changes the picture.

For trolling motor installs, protect the cable where it runs up the shaft. The Cable Save’R we carry is made for down and side imaging cables.

Display, power and GPS

  • 12 V supply (10.8 to 17 V), 2.0 A typical and 2.9 A max draw, 3 A fuse
  • 11.02 x 6.56 x 3.05 in, 4.14 lb, panel or bracket mount
  • Compass safe distance 12 in
  • 16-channel GPS with WAAS and 10 Hz updates
  • IPX7 with the card door closed, operating from 5 to 131 F

Room to add more

The Lowrance HDS PRO 9 with Active Imaging HD transducer runs FishReveal on DownScan out of the box. FishReveal on SideScan needs an S3100 module. For live sonar it accepts ActiveTarget 2, two systems at once if you want them, and Lowrance’s HDS PRO page lists the rest of the add-ons, from HALO radar to Power-Pole control.

Lowrance HDS PRO 9 with Active Imaging HD questions

Is the transducer the same Active Imaging HD 3-in-1 sold separately?

The kit includes an Active Imaging HD 3-in-1. We also sell the Active Imaging HD 3-in-1 on its own if you want a second one for another location.

What does FishReveal do?

FishReveal combines CHIRP targets with the DownScan picture, so fish stand out from the structure around them.

Can I return it?

No. Electronics are final sale at our shop, so settle the mounting plan before ordering (see returns).

Email sales@trollingmotorsdirect.org with your boat and motor, and we’ll help you plan where the Lowrance HDS PRO 9 with Active Imaging HD transducer and its sonar should go. Other transducers are in Lowrance transducers, and every display is in Lowrance graphs.

Related products

error: Content is protected !!