Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Handscope Handle Replacement

$45.00

Replacement handle for the Handscope live sonar pole. Aircraft grade aluminum with stainless steel hardware, made in the USA. Choose the 14 1/2 inch handle or the shorter 6 inch for console mounts and tight spaces.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

A Handscope replacement handle is the quick fix when the original goes over the side, gets bent, or turns out to be the wrong length for where you mounted the pole. It comes in 14 1/2″ and 6″ versions, made from aircraft grade aluminum with stainless steel hardware, and it’s made in the USA.

Which handle length

The Handscope is sold with either handle, and these are the same two sizes.

  • 14 1/2″: a longer reach and an easier turn when you’re standing beside the pole.
  • 6″: the one to choose for a console mount or a tight space where a long handle would hit the windshield, a seat or a rod locker lid.

If you move the pole between the bow and the console, keeping one of each makes sense. Swapping is an allen wrench job, so a Handscope replacement handle in the other length gives you the choice each trip.

To check which one you have now, measure the handle from where it meets the pole to the end. Anything close to 6″ is the short one.

A handle that’s bent, has a damaged bolt hole or has been crushed under a hatch lid won’t turn the pole cleanly. Replace it before it lets go on the water, when you’re trying to stay on a fish.

Handscope replacement handle build

Lengths14 1/2″ or 6″
MaterialAircraft grade aluminum
HardwareStainless steel
MadeUSA

Fitting it

The Handscope uses stainless hardware and standard allen wrenches throughout, so fitting a Handscope replacement handle doesn’t need anything special. While the handle is off, it’s a good time to wipe down the pole and check that the split rings still lock tight.

When you fit the new one, choose its position. The handle can sit in line with the arrow, 90 degrees to the right, or 90 degrees to the left. If your old handle always felt awkward, try a different position before you blame the length.

If you run MEGA Live on the pole, Humminbird’s MEGA Live compatibility list is the place to check which head units it works with.

Handle questions

Will the Handscope replacement handle fit another brand of pole?

It’s made for the Handscope. We don’t list it for other poles.

Can I change from the long handle to the short one?

Yes. Order the 6″ and swap it on with an allen wrench.

Is the hardware included?

Yes, the handle comes with stainless steel hardware.

Can I send it back if I order the wrong size?

If it’s unused, you can send it back within 30 days. Our returns policy has the details.

Other Handscope parts are under Handscope mounts. Email sales@trollingmotorsdirect.org with a photo of your setup and we’ll suggest the right handle length.

Additional information

Length

6", 14 1/2"

Related products

error: Content is protected !!