Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Gunnel Rail Rod Rack/Off the Deck Ram Mount Plate

$40.00

A black powder coated aluminum plate made to fit the gunnel rail. It holds Millenium Spider rod racks, our vertical rod racks or the Off the Deck Ram Mount. Choose a 25, 45 or 90 degree track.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

Rod racks and RAM mounts can hang off the gunnel rail with the gunnel rail rod rack plate. It’s black powder coated aluminum, machined in the USA, and made to fit the rail. You might have seen it on John Godwin’s SeaArk Flex.

What the gunnel rail rod rack plate holds

Getting rods or a RAM-mounted accessory up on the rail frees deck space where you stand and keeps rods out from underfoot. It also puts them where you can reach them without bending down.

Track degree: 25, 45 or 90

The plate comes in three track angles: 25, 45 or 90 degrees. Pick the angle that holds your rack or off the deck ram mount the way you want it to sit relative to the rail and the deck. If you’re not sure which one suits your boat, email us a photo of the rail and tell us what you’re mounting.

Installing on the gunnel rail

There are two ways to fit it, and the hardware decides which:

  • Over the gunnel rail: use hardware that sits flush with the bracket.
  • With lock nuts: install the bracket so it’s inside the gunnel rail.

Either way the goal is the same: nothing sticking out where it can catch line, snag a rod or bark a shin. “Gunnel” is the boat-shop spelling of gunwale, the top edge of the hull, and it’s a spot that sees a lot of hands, rods and rope.

Use stainless hardware on a boat. If you’re running in salt or brackish water, a little anti-seize on the threads helps later when you want to move something.

Before you order

It’s made to fit a gunnel rail, so check that your boat has one and measure it before ordering. Decide what you’ll hang on it first, since the rack or mount you choose affects which angle makes sense. Check what’s already on the rail too, like rod holders, cleats or a cup holder, so the plate has a clear spot. More parts for these boats are in our SeaArk section.

Questions

Does the gunnel rail rod rack plate fit the Off the Deck Ram Mount?

Yes. It accommodates the Off the Deck Ram Mount as well as rod racks.

Which angle should I pick?

That depends on how you want the rack or mount to sit. Send us a photo and we’ll help.

Where are the rod racks?

In our vertical rod racks section.

Email sales@trollingmotorsdirect.org with your boat, rail and what you plan to mount on the gunnel rail rod rack plate, and we’ll help you choose the track degree.

Additional information

Track Degree

25, 45, 90

error: Content is protected !!