Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

R’Vertical 10 Rod Rack (Sold Individually)

$86.00

One black vertical rack unit that holds 10 rods, sold each. 6 inches wide and 14 inches tall. Build a 2 unit setup for shorter rods or a 3 unit setup for 14 to 16 foot spider rigging rods.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

A vertical 10 rod rack stands your rods up in a row instead of spreading them across the deck, which frees floor space on a crowded boat. This listing is for one black unit. You combine units into a setup that matches your rod lengths, and you set the height to suit your boat.

Two units or three

Every rod needs support at more than one point, so the racks are used in groups.

  • 2 units: fine for shorter rods, like the ones you pull crankbaits with.
  • 3 units: add a third rack when you’re carrying 14 to 16 foot crappie rods for spider rigging.

Long spider rigging rods bend between supports, and a third rack keeps the tips from drooping onto the deck.

Since each vertical 10 rod rack is sold on its own, you can start with two for your shorter rods and add the third later, when the long spider rigging rods come aboard. Nothing about the first two units has to change.

Vertical 10 rod rack size and setup

ItemDetail
Capacity10 rods per unit
Width6 in
Height14 in
ColorBlack
ToolsStandard allen wrenches
Deck mounting hardwareNot included

The height is built up to fit your boat. The rack in our photos stands 4 1/2 inches off the deck, which gives you an idea of a typical setup, but yours can sit differently.

Before you mount it

Line the units up with a long rod laid across them before you drill anything. Check that the rods clear seats, consoles and the trolling motor when they’re loaded. You’ll need your own deck screws or bolts, and stainless is the right choice on a boat.

A vertical 10 rod rack only takes up a 6 inch wide strip of deck, so the usual spots are along the gunnel, beside the console or across the back deck. Pick a place where you can reach the handles without stepping over anything.

The bungee cords that hold rods in place wear over time like any rubber. We sell replacement bungee cords that fit both the 8 and 10 rod racks.

Common questions

How is the vertical 10 rod rack different from the 8 rod version?

It holds ten rods instead of eight and is 14 inches tall. The 8 rod holder adjusts from 17 to 21 inches in 1 inch steps.

Can I mix 8 and 10 rod units?

The listings don’t cover mixing them. Email us your plan and we’ll tell you whether the rod slots will line up.

Is it sold as a set?

No, one unit per order line. Order two or three for a working setup.

Browse all our vertical rod racks, or email sales@trollingmotorsdirect.org with your boat and rod lengths for help planning a layout.

Additional information

Color

Black

Related products

error: Content is protected !!