Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Garmin Panoptix LVS62

$2,499.99

LiveScope XR LVS62 transducer only (010-02719-10), for upgrading an existing GLS 10 sonar black box. Range to 500 ft in freshwater and 350 ft in saltwater. Perspective, barrel and shaft mounts plus power cable included.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

The Garmin LVS62 transducer is the LiveScope XR transducer sold without the black box, for anglers who already run a GLS 10 and want more range. Part number 010-02719-10 swaps in and takes the system out to 500 ft in freshwater and 350 ft in saltwater. That reach is why Garmin pitches XR at coastal and open-water fishing.

Who it’s for

This is the upgrade path if you own a GLS 10 sonar module from an earlier LiveScope setup. If you don’t have a GLS 10, you’ll want the full LiveScope XR system or a GLS 10 module to go with it.

The LVS62 runs at 265 to 550 kHz. That lower band is what reaches deep, and the cost is some close-in detail: target separation is 22 in at 100 ft. For water inside 200 ft, the LVS34 is the usual pick.

Features you’ll use

Reverse Range Offset uses more of the screen for fish and structure at long range, and Compress Range keeps the area near the boat readable while you watch farther targets. Built-in stabilization holds the image steady in rough conditions. Forward mode scouts ahead, Down shows deeper water under the boat, and Perspective gives an above-the-water view. There are seven color palettes, among them aqua, Caribbean and lava.

Garmin LVS62 transducer specs

ItemSpec
Part number010-02719-10
Frequency265 to 550 kHz
Max depth, Down and Forward500 ft freshwater; 350 ft saltwater
Beamwidth20 x 135 degrees
Cable20 ft, 21 pins
Size8.20 x 3.98 x 2.76 in
Weight with cable3.92 lb
Operating temperature0 to 40°C
Water ratingIPX7
System power10 to 32 V; 21 W typical, 58 W max; 500 W transmit; 7.5 A fuse
Compass-safe distance7 in

In the box

  • LiveScope XR LVS62 transducer
  • Perspective mount (made for the LVS62)
  • Trolling motor barrel mount and shaft mount
  • Power cable
  • Documentation

Before you order the Garmin LVS62 transducer

Confirm the black box on your boat is a GLS 10, and update your chartplotter software before you fit the new transducer. The LVS62 is 8.2 in long, bigger than the LVS34, so check it will clear the hull and trolling motor when stowed. The 20 ft cable also needs to reach the GLS 10 from wherever you mount it.

Questions

Does the Garmin LVS62 transducer work with LiveScope 2?

No. It runs through a GLS 10 black box. LiveScope 2 transducers like the LVS44 connect without one.

Which LiveScope should I pick?

Garmin’s article on which LiveScope model is right for you compares the range and detail trade-offs, and our LiveScope guide covers mounting.

Can I return it?

Transducers are final sale per our returns policy, so check your black box and chartplotter first.

See more Garmin transducers, or email sales@trollingmotorsdirect.org with your GLS 10, chartplotter and trolling motor and we’ll confirm the fit.

Related products

error: Content is protected !!