Description
This Garmin 8600 series deck mount carries the big 8616, 8617, 8622 and 8624 glass helms on the front deck or console. You pick the monitor size first, then the mount type: a stationary double arm frame or a riser swivel base. Every version ships with a MEGA base adaptor plate and an under plate so the deck ends up clamped between two pieces of aluminum.
Which screens it fits
The frame is sized to the monitor, which is why the first menu asks for your 8600 size.
- 16″ for the 8616
- 17″ for the 8617
- 22″ for the 8622
- 24″ for the 8624
Garmin’s GPSMAP 8400/8600 owner’s manual lists the model numbers if you’re not sure what’s on your dash. We also stock the Garmin GPSMAP8616xsv if you’re building a new helm.
Double arm or swivel base
The double arm stationary mount is set-and-forget. It’s the one for a console screen or a bow screen you always read from the same spot.
The riser swivel mount uses a knob. Back it off and the monitor turns left or right through a full 360 degrees, so you can point the screen at the back deck when your partner is running the graph. With the knob loose the whole monitor also lifts off the swivel base, which is how most people store a 22″ or 24″ screen between trips.
Both styles come in 6″ and 8″. A 10″ riser swivel is listed for the 24″ screen; if you need a 10″ on another size, email us before ordering.


Mounting the Garmin 8600 series deck mount
The MEGA base adaptor plate goes on top of the deck and the under plate goes beneath it. Through-bolted, the pair squeezes the deck and spreads the load of a heavy screen across a wide footprint rather than a few holes. On a 22″ or 24″ screen that extra support is real, so don’t skip the under plate.
Check what’s under the deck before you drill, and make sure you can reach the under plate with a wrench. Seal the holes so water stays out of the deck core.
All the parts of the Garmin 8600 series deck mount are CNC machined aluminum with a black and clear anodize finish, machined and assembled in the USA. Our other single monitor mounts cover smaller screens.
Questions
Can one Garmin 8600 series deck mount fit any 8600 size?
No. The frame is built for the size you pick, so order the one that matches your screen.
Should I get the 6″ or 8″?
Go 8″ if you fish standing and want the screen up near eye level. Choose 6″ for a console or anywhere the screen needs to stay low.
Send your boat, deck layout and Garmin model to sales@trollingmotorsdirect.org and we’ll help you get the right combination.




































