Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Garmin 70A Power Plug for Force Trolling Motors

$49.99

The plug half of Garmin’s 70 amp quick-disconnect for Force trolling motors (010-12832-41). It goes on the motor’s power lead and mates with the Garmin 70A power receptacle, sold separately.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

A Garmin 70A power plug lets you disconnect a Force trolling motor from its batteries without pulling ring terminals off a stud. This is Garmin part 010-12832-41, the plug half of the set. It mates with the Garmin 70A power receptacle, which we list separately.

Why fit a plug at all

Garmin treats the plug and receptacle as optional, but they earn their keep. Pulling the plug kills power to the motor in one move, which is handy for trailering, winter storage and any time you’re working near the prop. It also makes pulling the motor off the boat for service a lot quicker.

Garmin’s manuals call for a trolling motor plug and receptacle rated for 60 A or greater, installed at the bulkhead. At 70 A, this Garmin pair clears that rating with room to spare.

Fitting the Garmin 70A power plug

  • Turn the breaker off and disconnect the batteries before you touch the power leads.
  • Fit the plug to the motor’s power cable, positive to positive and negative to negative, following Garmin’s instructions for the terminals.
  • Mate it with the Garmin 70A power receptacle mounted in the boat.
  • Keep the 60 A circuit breaker in the circuit. A plug is a disconnect, not overcurrent protection.

Once it’s in, push the plug fully home every time and give it a tug. A half-seated plug runs warm under load. If you ever see discolored plastic or soft, melted edges on either half, replace the pair before the next trip.

More on trolling motor plugs

If you’re comparing plug styles or sorting out wiring on a new boat, our trolling motor plug guide walks through it. Garmin’s power spec, wire sizes and tool list are in the Force Pro installation manual.

Plugs from different makers aren’t built to mate with each other. If your boat already has another brand’s receptacle, replace both halves rather than mixing, so the Garmin 70A power plug seats into a Garmin receptacle every time.

Keep the plug’s contacts clean and dry between trips. A quick look when you unplug for the night will catch corrosion long before it turns into a voltage drop you notice on the water.

Quick answers

Do I need the power receptacle as well?

Yes, unless you’re only replacing the plug on an existing Garmin set. The plug and the power receptacle are separate listings.

Is the Garmin 70A power plug only for the Force?

It’s listed for the Garmin Force trolling motor. If you run a Kraken or another brand, email us before ordering.

Can it be returned?

Electronics are final sale here, so confirm the part number first. See our returns policy.

If you’d like help with the wiring, email sales@trollingmotorsdirect.org with your motor model, battery setup and boat. More Garmin parts are in our Garmin accessories category.

Related products

error: Content is protected !!