Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Garmin 010-12841-01 Protective Cover For EchoMap Ultra 10in

$24.99

Garmin’s own cover for the 10-inch ECHOMAP Ultra (102 and 106 models). Put it on whenever the graph is off. The newer ECHOMAP Ultra 2 takes a different cover, sold separately.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

The Garmin 010-12841-01 protective cover is Garmin’s own cover for the 10-inch ECHOMAP Ultra. It goes on any time the graph is switched off: on the trailer, in the driveway, or tied up at the dock overnight. Sun, rain and highway grit land on the cover instead of the glass.

Which graph the Garmin 010-12841-01 protective cover fits

We list this part for the 10-inch ECHOMAP Ultra, which covers the 102 and 106 models. Garmin’s short online blurb for 010-12841-01 mentions the ECHOMAP Plus, so if you own a Plus, or anything that isn’t a 10-inch Ultra, email us before you order and we’ll check it for you.

The ECHOMAP Ultra 2 is a newer unit with its own cover. If the label on your graph says Ultra 2, you want the protective cover for the ECHOMAP Ultra 2 10in instead. The 12-inch Ultra (122 and 126) uses the 010-12842-01 cover.

How to check your model in a minute

  • Back label: the model name and part number are printed on the sticker on the back of the unit. Pull it out of the cradle or bail and look.
  • Model number: on the first-generation Ultra, the first two digits are the screen size. A 102 or 106 is a 10-inch unit; a 122 or 126 is a 12-inch.
  • Box or receipt: if you still have them, the full name and Garmin part number are printed on both.

Why a cover earns its spot in the boat

Most of the wear on a graph happens while nobody is using it. A screen left bare on the trailer bakes in direct sun for hours, then picks up bugs, gravel and spray from the road. A screen cover that goes on every time you shut down is the cheapest protection you can give a unit that costs far more to replace.

It also keeps rain and wash-down water off the face of the unit when the boat sits uncovered between trips. If you store the boat outside, that matters more than people think.

Day-to-day use

  • Leave it on for the tow. Take it off at the ramp once the boat is floating and the graph is about to be switched on.
  • Stow it in a dry console box or rod locker while you fish so it doesn’t blow out of the boat at speed.
  • Rinse sand and grit off the inside before you put it back on, so nothing gets dragged across the glass.
  • For a bow graph on a deck mount, our Graph Cover Keeper uses bungee cords to hold the cover to the screen while you trailer.

For mounts and other parts for the same unit, browse Garmin graph accessories. Free ground shipping applies on orders of $199 or more to the lower 48 and DC; the details are on our shipping policy page.

Questions about the Garmin 010-12841-01 protective cover

Can I leave it on while I fish?

No. Garmin designed it to protect the unit when it’s not in use, so take it off before you power up and start reading sonar.

Will it fit a 10-inch ECHOMAP Ultra 2?

We don’t sell it for that. The Ultra 2 has its own cover listed separately, so match the generation before you order.

Where can I see Garmin’s listing?

Garmin lists the part on its 010-12841-01 product page. The Garmin 010-12841-01 protective cover we ship is that same part number.

If you’re unsure which graph you have, email sales@trollingmotorsdirect.org with the model from the back label (Monday to Friday, 9am to 6pm) and we’ll confirm the fit before it ships.

Related products

error: Content is protected !!