Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Lowrance Elite FS 10 No Transducer

$1,989.99

Lowrance Elite FS 10 display only (US/CAN), part 000-16429-001. No transducer in the box, so you choose your own. 10-inch 1280×800 touchscreen, C-MAP Discover Onboard, 9-pin sonar and Ethernet ports.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns
SKU: LOW00016429001
Category: , , ,

Description

Buy the Lowrance Elite FS 10 no transducer version when you already know what sonar you want, or already have it on the boat. It’s the same 10-inch US/Canada Elite FS display, part 000-16429-001, with C-MAP Discover Onboard preloaded, minus the transducer. That leaves you free to pair it with ActiveTarget 2, Active Imaging, or Active Imaging HD.

Picking a transducer for it

The display has one 9-pin sonar port and one Ethernet port. That shapes your choices:

  • Active Imaging 3-in-1: plugs straight into the 9-pin port for CHIRP, SideScan and DownScan. See our Active Imaging 3-in-1.
  • Active Imaging HD 3-in-1: supported with an S3100 sonar module.
  • ActiveTarget 2 live sonar: its module connects over Ethernet. Lowrance’s ActiveTarget 2 page lists Elite FS as compatible.
  • An existing 9-pin transducer: may plug right in. Send us its part number and we’ll confirm.

Be aware the listing notes no split-screen options on the 10 and 12-inch Elite FS. If you were counting on two sonar views side by side, talk to us before ordering.

In the box with the Lowrance Elite FS 10 no transducer

You get the Elite FS 10 display, its suncover, the HDS-10 PRO / Elite FS-10 bracket, a Lowrance power cable, a fuse and fuse holder, and a corner clip. Because the bracket is shared with the HDS10 PRO, a spare HDS10 Pro bracket and knobs works as a second mounting point, for example one at the bow and one at the console.

Screen, power and connections

On the Lowrance Elite FS 10 no transducer, the 10-inch screen runs 1280 x 800 with multi-touch, brightness over 1,200 nits and an 80° viewing angle in every direction, so it stays readable from the back deck. It weighs 3.66 lb (1.66 kg) and is rated IPX6 and IPX7.

It runs on 12 V DC (10 to 17 V) with a 3 A fuse and draws up to 34.5 W (2.5 A at 13.8 V). Connections are NMEA 2000 (Micro-C), Ethernet (5-pin, 100Base-T), the 9-pin sonar port and a microSD/SDXC slot. Built-in Wi-Fi 802.11b/g/n doesn’t network units together, and Bluetooth is 4.0. The 10 Hz GPS supports WAAS, MSAS, EGNOS and GLONASS. Keep it 2.1 ft (65 cm) from a compass. It operates from 5°F to 131°F and stores from 4°F to 140°F.

Maps

C-MAP Discover Onboard is preloaded, with 1-foot contours on 19,000 US lakes and more than 9,400 in Canada. The C-MAP Discover page covers the chart features. Navionics and other C-MAP charts are options if you prefer them. FishReveal is built in for when you add an imaging transducer.

Before you order

Check your transducer plan, your power run and where the bracket will sit. Compare with the bundled version in our Lowrance graphs section, or read our Lowrance fish finder guide for the bigger picture.

Questions

Does the Lowrance Elite FS 10 no transducer show sonar without one?

No. You’ll have charts and GPS, but sonar needs a transducer or live sonar system connected.

Is it returnable?

Displays count as electronics, and electronics are final sale at our shop. The full terms are in our returns policy.

Email sales@trollingmotorsdirect.org with your boat and the transducer you plan to run, and we’ll confirm it all works together.

Related products

error: Content is protected !!