Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Track 3″

$45.00

A heavy duty 3 inch track, 6 inches long, in black anodized aluminum. Mount it on the deck or gunnel and our Track Mount Base slides in, so your mounts become removable. Deck hardware not included.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

A 3 inch mount track turns a graph or transducer mount that’s bolted in one spot into one you can lift off and move. The track is 6 inches long, made from black anodized aluminum and machined in the USA. You fasten it to the deck or gunnel, and our Track Mount Base fits into it.

3 inch mount track in black anodized aluminum, 6 inches long

How the track system works

The track is the part that lives on your boat. The Track Mount Base is the part that fits into the track, and it accepts all our stationary round base mounts and our swivel base mounts. Put the two together and any of those mounts can come off the boat or move to another spot.

That’s useful for covering the boat, trailering without a graph hanging out in the wind, or switching how you fish. Put a track on the front deck, another at the console and one on each side, and your graph or over the side mount can follow you around the boat.

3 inch mount track specs

ItemDetail
SizeHeavy duty 3 inch track, 6 inches long
MaterialBlack anodized aluminum
FitsOur Track Mount Base
Deck mounting hardwareNot included
MadeMachined in the USA

Planning where it goes

Think about how you fish before you drill. A track near the bow suits a forward facing sonar pole or a graph you watch while running the trolling motor. A track on each gunnel lets you move a side mount from port to starboard depending on the wind. Brands like Garmin, Lowrance and Humminbird all make graphs that go on our mounts.

Because the Track Mount Base is the piece that moves, you can put down more tracks than you have mounts. Each 3 inch mount track is the cheap part of the system, so adding one more spot later costs little.

Installing a 3 inch mount track

Deck mounting hardware isn’t included, so pick stainless fasteners that suit your deck. Through bolts with a backing plate are best where you can reach underneath. Seal each hole so water can’t get into the core.

Set the base and mount in the track before you drill, to check clearance for the graph swing and your feet.

Questions

Does the 3 inch mount track include the Track Mount Base?

No. The base is sold separately. This listing is the track only.

Does it come with screws?

No, deck mounting hardware isn’t included.

Is there a cheaper option with cosmetic marks?

Sometimes. Check our scratch and dent section for track sold as is.

See our mount guide for more on mounting gear, or email sales@trollingmotorsdirect.org with your boat and the mounts you run, and we’ll help you plan where the track goes.

Related products

error: Content is protected !!