Description
The Cable Save’R is a trolling motor cable saver for the cables that run down your shaft to a down imaging or side imaging transducer. Loose cables get pinched when the motor stows, snagged on brush and chafed against the bracket. This patented cable protection kit wraps them in a heavy duty black hose held by aluminum clamps, so they move with the motor instead of against it.
How the trolling motor cable saver is built
- High strength poly tubing encases the cables.
- The hose is split along its length, so the cables go in without unplugging anything.
- Aluminum clamps hold the hose to the motor.
- The heavy duty hose is made specifically for this product and comes in black.
It’s an easy install on a long list of motors, and it fits down and side imaging transducer cables. It will not fit live view transducer cables. For live sonar on the motor, look at our live view transducer mounts instead.
Motors you can order it for
| Motor | Options listed |
|---|---|
| Terrova | 2016 and older without lift assist, 2017 to 2023 with lift assist, 2024 and newer without lift assist, Terrova Quest |
| Riptide Terrova | 2016 and older without lift assist, 2017 to 2023 with lift assist, 2024 and newer without lift assist, Riptide Terrova Quest |
| Ultrex and Ulterra | Ultrex, Ultrex Quest, Ulterra, Ulterra Quest |
| Other Minn Kota | PowerDrive V2, Instinct Quest |
| Other brands | Garmin Force, Lowrance Recon, MotorGuide Xi3, MotorGuide Xi5, Rhodan |
Shaft lengths run from 36″ to 96″ (36, 45, 48, 50, 52, 54, 57, 60, 72, 84, 87 and 96). Not every length is offered for every motor, so checkout only shows the pairs we list. Minn Kota’s trolling motor lineup helps if you need to confirm your model.
Which Terrova do you have
The Terrova options matter, because the generations are built differently. A 2017 to 2023 Terrova has a lift assist belt, a large plastic collar above the trolling motor, and a plastic box about 4″ x 4″ on the shaft above the point of deployment. If yours has those, choose the “with lift assist” option. If not, the model year decides between 2016 and older or 2024 and newer.


Fitting tips
Fitting a trolling motor cable saver takes no special tools. Work with the motor deployed so the cables are at full stretch. Lay them into the split hose, close it up, and fit the clamps. Then stow and deploy a few times and watch for any spot where the hose pulls tight. Good cable protection should follow the motor through its whole range without tugging at the transducer.
Our trolling motor parts guide covers other wear points worth checking while you’re at the bow, and more accessories are in trolling motor accessories.
Cable Save’R questions
Will the trolling motor cable saver fit my LiveScope or MEGA Live cable?
No. It’s made for down and side imaging transducer cables and will not fit live view transducer cables.
Does it fit a Terrova Quest?
Yes, Terrova Quest and Riptide Terrova Quest are both in the motor options.
What color is the hose?
Black.
Email sales@trollingmotorsdirect.org with your motor, model year, shaft length and transducer, and we’ll confirm the right trolling motor cable saver option before you order.












