Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Bridge Mount

Price range: $159.00 through $182.00

Our standard bridge: 1/2″ thick 6061 aluminum, 13″ inside and 5″ tall with standard legs. Tapped for most graph mounts except Helix 7. Choose 5″, 6″, 7″ or 8″ legs. Deck hardware not included.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

The 13 inch bridge mount is our standard bridge, cut from 1/2″ thick 6061 high strength aluminum. Inside, it measures 13″ across and 5″ tall with the standard legs. It’s drilled and tapped in several places so most graph mounts bolt right on, and it gives taller mounts a wider, steadier stance on the deck.

Why put a mount on a bridge

A tall mount bolted straight to the deck stands on a small footprint. Put the same mount on a bridge and the load spreads out to two legs 13″ apart, which steadies the screen on most boats.

The 13 inch bridge mount also lifts the mount’s base 5″ off the deck before the arms even start. That means a shorter, stiffer mount on the bridge can put the screen at the height a taller one would need on bare deck.

A bridge also lets the screen sit over the trolling motor pedal instead of beside it. On a cable-steer motor, the pedal is how you steer, as Minn Kota’s trolling motor buying guide explains, so having the graph right above your foot is a natural place for it.

What bolts to the 13 inch bridge mount

It pairs with our double monitor mount or the deck single monitor mount. In fact, every machined mount we sell bolts straight on, with two exceptions:

  • Telescoping deck mounts
  • Swivel telescoping mounts

The top is also tapped for nearly every graph setup. The Humminbird Helix 7 is the odd one out and needs the Helix 7 adapter bracket, sold separately.

13 inch bridge mount in black aluminum with standard 5 inch legs

Leg height

Leg optionHeight change vs. photos
5″ (standard)Same as the ruler photos
6″Add 1″
7″Add 2″
8″Add 3″

The ruler photos are taken with the standard 5″ legs, so add the difference to any total height you read off them. Pick taller legs when your pedal needs more room or you stand to fish.

Decks, flex and hardware

Deck mounting hardware isn’t included. On aluminum decks we recommend the bridge under plate, which goes beneath the deck for more stability and less flex. You’ll find it here: Bridge Under Plate.

Use stainless bolts long enough to pass through the bridge feet, the deck and the under plate, with lock nuts or a drop of blue threadlocker underneath. Seal every hole, then set the 13 inch bridge mount down and tighten evenly so both legs pull flat to the deck.

Questions

Will my telescoping mount fit the 13 inch bridge mount?

Not directly. Telescoping deck mounts and swivel telescoping mounts don’t bolt straight to this bridge. For a swivel telescoping mount, look at the bridge adaptor deck plate.

Does it fit a 12″ pedal span?

This one is 13″ inside. We list a separate 12″ span bridge for tighter spots.

More bridges are in our bridge mounts section. Email sales@trollingmotorsdirect.org with your pedal, mount and boat, and we’ll help you pick legs.

Additional information

Leg Height

5" (Standard), 6", 7", 8"

Related products

error: Content is protected !!