Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Off the Deck Ram Mount

$162.50

A Ram mount with black anodized aluminum brackets that holds our manual Handscope off the deck. Stainless steel Allen head bolts. The Handscope and transducer are sold separately.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

The off the deck Ram mount holds our manual Handscope off the deck using a Ram mount and black anodized aluminum mounting brackets. The bolts are stainless steel Allen head. It gives the Handscope a fixed home on the boat, away from the trolling motor.

What the Handscope needs from a mount

The Handscope is a manual pole for a live sonar transducer. It fits Garmin Panoptix and LiveScope, Humminbird MEGA Live and Lowrance Active Target, and you aim it by hand. It’s not meant to go on a trolling motor, so it needs its own spot on the boat.

This mount gives it one. The Ram mount sits off the deck and the machined brackets hold the Handscope pole, so you can stand, fish and turn the transducer without holding the whole pole up yourself.

Off the deck Ram mount parts and finish

  • Ram mount for off the deck mounting
  • Mounting brackets made for the manual Handscope, in black anodized aluminum
  • Stainless steel Allen head bolts
  • Handscope and transducer sold separately

The black anodize on the brackets matches the Handscope, which is machined aluminum with black anodize and black powder coat finishes. Stainless bolts stand up to water far better than plated hardware.

Picking a spot

Choose a place where you can reach the Handscope handle while standing to fish, and where the transducer hangs clear of the hull and the trolling motor. On boats with a gunnel rail, our gunnel rail plate for the off the deck Ram mount is machined to fit the rail, so you aren’t drilling the deck.

If you go with the gunnel rail plate, its listing has a tip worth repeating: use hardware that sits flush with the bracket if it goes over the rail, or put the bracket inside the rail if you use lock nuts.

Because you aim the transducer by hand, give the cable enough slack for the way you swing it. A loose loop near the mount is easier to manage than a tight run that tugs on the transducer every time you turn.

If you’re still choosing a transducer, Garmin’s article on which LiveScope model is right for you is a good start, and our guide to forward facing sonar covers the basics. More Handscope parts are in our Handscope mounts section.

Questions

Does the off the deck Ram mount include the Handscope?

No. It’s the Ram mount, the brackets and the bolts. The Handscope and your transducer are separate.

Will it hold a Live Sweep or Cable Steer?

The brackets are made for the manual Handscope. For a Live Sweep or Cable Steer off the deck, look at our Over the Side Mount.

What tools do I need?

The bolts are Allen head, so a set of Allen wrenches handles the brackets. Unused, the off the deck Ram mount can be returned within 30 days under our returns policy.

Email sales@trollingmotorsdirect.org with your boat model and where you’d like the Handscope, and we’ll help you plan the mount.

Related products

error: Content is protected !!