Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Dealer Pack Double Deck Mount

$638.00

For our dealers only. Parts to build one double deck mount with a choice of 6, 8, 10, 12 or 14 inch arm. Build it with the arm that suits the boat, then reorder that length.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

The dealer pack double deck mount deals with the one thing you can’t easily change once a double mount is bolted to a customer’s deck: arm length. It has the parts to build one double deck mount, with a 6, 8, 10, 12 or 14 inch arm to choose from. It’s offered to our dealers only.

Five arm lengths, one build

Build the mount with the arm that suits the boat in front of you. Then reorder a double deck mount in that same arm length, and you’re back to having every option for the next job. The pack is there so the guesswork happens on the deck, with a tape measure, instead of on the order form.

Reordering after the job

The arm lengths in the pack line up with our Double Monitor Mount, which comes with 6, 8, 10, 12 or 14 inch arms. Order that double monitor mount in the length you installed.

That retail mount is made from 6061 aluminum (the general-purpose alloy described on Wikipedia’s 6061 page), and it needs only standard allen wrenches to assemble.

The retail double monitor mount also asks for a center plate length, 13 or 15 inch. The 15 inch spreads the gimbal plates further apart for wider units, and the double mounts handle depth finders from 7 to 16 inches wide. If a customer upgrades screens later, the 15 inch center plate is sold on its own.

Fitting the dealer pack double deck mount

A double deck mount carries two graphs, so the arm you pick affects both screens. Before you drill:

  • Height: longer arms put the screens higher. Check that the angler can see over them, seated and standing.
  • Deck: thin decks, like many aluminum boats, do better with a plate under the mount. Our Mega Mount Adapter Plate enlarges the attachment area and fits the double mounts.
  • Trolling motor: leave room for the motor to stow and deploy without touching a graph.
  • Cables: route them so both screens can tilt without pulling.

Who it’s for

The dealer pack double deck mount is for shops rigging boats for customers. A boat owner doing one install is better off ordering the double mount in the right arm length from our double mount section.

Questions

Is the dealer pack double deck mount sold to the public?

No. The pack is designed for our dealers only.

Will a Helix 7 bolt to the double mount?

Not directly. Our double mounts are tapped for Humminbird, Garmin and Lowrance units, but the Helix 7 needs the Helix 7 adapter bracket.

What do I reorder after a job?

A double deck mount with the same arm length you used. That puts the pack back to full.

Dealers with questions about a specific boat can email sales@trollingmotorsdirect.org with the hull, trolling motor and graphs.

Related products

error: Content is protected !!