Description
Skip drilling the deck: the Over the Side gunnel rail plate puts an Over the Side Mount or Swivel Base on the track that runs along your gunnel. It’s black powder coated aluminum, comes with the mounting hardware, and is made to fit 1/4 inch track.
What it does
The plate sits between the track and the base. Bolt it to the track, fit the Over the Side Mount or Swivel Base to the plate, and your live sonar pole or mount goes where the track lets it, which can be a handier spot than any flat piece of deck.
Over the side mounting is one way to run live sonar such as Lowrance ActiveTarget 2 without putting it on the trolling motor. That’s why you’ll find this plate alongside our Live Sweep, Cable Steer and Handscope parts.
Choosing the angle
The plate comes in three track degree options. Choose the one that matches how the track sits on your rail.
| Option | Use |
|---|---|
| 25 degrees | Fits SeaArk boats |
| 45 degrees | For track set at a 45 degree angle |
| 90 degrees | For track set at 90 degrees |
If you aren’t sure, hold a speed square or an angle finder against the track and compare. A photo from the end of the rail also tells us a lot. SeaArk owners can see more parts in our SeaArk section.
What you need to have
- A 1/4 inch track on the gunnel rail
- An Over The Side Mount or a Swivel Base, sold separately
- Basic hand tools; the plate’s mounting hardware is included
The plate is the only part in this listing. Order the base you plan to use alongside it so the whole setup arrives together.
If your boat has a round rail instead of track, the Round Rail Mount is the part for that.
Fitting the Over the Side gunnel rail plate
Slide the hardware into the track, set the plate where you want it, and tighten evenly. Put the base on and check that the pole or arm clears the rail through its full swing before you lock everything down.
If the boat sees salt, rinse the plate and track after trips so grit doesn’t build up in the slot. Every so often, check that the Over the Side gunnel rail plate hasn’t crept along the track; a mount that moves an inch changes where your transducer points.
Plate questions
Does the Over the Side gunnel rail plate include the mount?
No. It includes the plate and its mounting hardware. The Over the Side Mount or Swivel Base is separate.
Which angle fits a SeaArk?
The 25 degree plate.
More bases and plates are under over the side mounts. Email sales@trollingmotorsdirect.org with a photo of your rail and track, and we’ll tell you which angle to order.












