Description
Two graphs on the console that you can turn toward whoever’s looking: that’s the SeaArk console double swivel mount. The graphs swivel 30 degrees, which means you can angle the screens toward the driver, toward a passenger, or away from glare without loosening the whole mount. It was made for the SeaArk Flex, but it may fit other boats and models too.
What the swivel adds
A fixed console mount points both screens straight back. That’s fine when you’re the only one looking. Once you’re idling a shoreline with a buddy, or the sun is low and flaring off the glass, being able to turn the screens 30 degrees makes them a lot easier to read.
If you don’t need the movement, our standard console double mount holds two graphs fixed in place. If you want the movement, the SeaArk console double swivel mount is the one to order.
SeaArk console double swivel mount details
- Mounts 2 graphs on the console
- Graphs swivel 30 degrees
- Made for the SeaArk Flex; may fit other boats and models
- Aluminum, black anodize finish
- Stainless steel hardware
- Adjusts with standard Allen wrenches
- Console mounting hardware not included
- Made in the USA
Fitting it to your console
On the Flex, it was designed to fit the console as built. On another boat, measure the flat area where it would bolt and check that you can reach behind the console for nuts. Don’t forget to swing the screens through their full 30 degrees with the mount held in place, so neither one hits a grab rail, windshield frame or the steering wheel.
Supply stainless bolts sized for your console, with washers or a backing plate inside. Leave cable slack behind each graph so the swivel doesn’t tug on connectors.
Living with it
Set the screens where you like them, then snug the swivel with an Allen wrench. Keep a set in the boat so you can re-angle things for a different seat or a passenger. Check the bolts on the SeaArk console double swivel mount after the first few trips, since new installs tend to settle a little. A drop of blue threadlocker on the fixed bolts keeps them from backing out over a season of bouncing.
Questions
Does the SeaArk console double swivel mount only fit the Flex?
It was made for the Flex and may fit other boats and models. Send us console measurements and photos to check.
How far do the graphs turn?
The listing gives 30 degrees of swivel.
Can it go back if it doesn’t fit?
If it’s unused, yes, within 30 days. Our returns policy covers the details.
More options are in our console mounts section. Email sales@trollingmotorsdirect.org with your boat and graphs and we’ll help you check fit.











