Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Swivel Folding Mount Base Adaptor Assembly

$297.00

Folding mount swivel base adaptor for our single and double folding mounts. Swivel your screens for glare or a better view, or remove them with a twist of a knob. Bridge use needs the bridge adaptor plate. Deck hardware not included.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

The folding mount swivel base adaptor lets one of our folding mounts turn at the base, so your graphs can swing toward you, away from the sun, or off the boat with a twist of a knob. It fits our single folding mount and our double folding mount.

Why add a swivel to a folding mount

A folding mount on its own points one way. Add the swivel and you can turn the screens when the light changes or when you move between the bow and the console. Glare is at its worst with the sun high or low behind you, and a small turn is often all it takes to read the screen again.

The other benefit is removal. The swivel base lets you take the graphs off with a twist of a knob, which is handy at the ramp or when the boat sits outside overnight.

Boats without a recessed foot pedal

If your boat doesn’t have a recessed foot pedal, this assembly is listed as the option for our folding mounts. Before you drill, set the base where you plan to mount it and check that the mount and screens clear the pedal and your feet through the full swing.

If you don’t have a folding mount yet, see our folding mounts. The Folding Single Mount without Bridge is a common starting point.

Putting the folding mount swivel base adaptor on a bridge

It can also go on one of our bridges. For that you need the bridge adaptor plate, sold separately. The bridge adaptor plate sits between the bridge and the swivel base.

Fit the folding mount swivel base adaptor to the folding mount on the bench first, then set the whole assembly on the deck or bridge to mark your holes. It’s far easier to line things up with the screens off.

Order both at the same time if a bridge is the plan, so you aren’t waiting on a second box with the boat half rigged.

Build details

  • CNC machined aluminum
  • Stainless steel hardware
  • Black anodized finish
  • Made in the USA
  • Deck mounting hardware not included

Pick up stainless deck fasteners before install day, and bed each hole in marine sealant so water can’t get into the deck.

Questions

Which folding mounts does the folding mount swivel base adaptor fit?

Our single folding mount and our double folding mount.

Can I put it on a bridge?

Yes, with the bridge adaptor plate, which is sold separately.

Is deck hardware included?

No. Plan on your own stainless fasteners sized for your deck.

Not sure whether your boat needs the folding mount swivel base adaptor or a different base? Email sales@trollingmotorsdirect.org with your boat, trolling motor and mount, and we’ll sort it out.

Related products

error: Content is protected !!