Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Blue Loctite Medium Strength Threadlocker

$4.00

Loctite 243 blue medium strength threadlocker in a 0.5 mL capsule. Removable, primerless and oil tolerant, for fasteners from 1/4 to 3/4 inch. Ships within the continental United States only.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

Trolling motor mount bolts, graph bracket screws and transducer hardware all live with constant vibration, and Blue Loctite Medium Strength Threadlocker keeps them from backing out. This is Loctite 243, part number 1330255, in a single 0.5 mL capsule. It’s the removable, medium strength grade, so you can still take things apart with hand tools later.

What Loctite 243 is

Loctite 243 is a primerless, oil tolerant, removable blue threadlocker for locking and sealing threaded fasteners from 1/4 to 3/4 inch (6 to 20 mm). It’s the recommended replacement for the older Loctite 2440.

Loctite calls it a next generation formula. Compared with older blue threadlockers, it brings:

  • Temperature resistance up to 360 F
  • Oil tolerant curing on fasteners as received, without cleaning
  • Primerless performance on both active and inactive metals

Blue Loctite medium strength threadlocker specs

ItemDetail
ProductLoctite 243, part 1330255
Size0.5 mL capsule
StrengthMedium, removable
Fastener size1/4 to 3/4 in (6 to 20 mm)
TemperatureUp to 360 F
MetalsActive (brass, copper) and passive (stainless steel, plated)
ContaminationTolerates minor oil from cutting, lubrication and protection fluids

Using blue Loctite medium strength threadlocker on the boat

Put a drop on the threads where the nut or tapped hole will sit, then assemble and tighten as usual. Give it time to set before you run the boat through rough water.

A little goes a long way. Blue Loctite medium strength threadlocker only needs to fill the threads that are engaged, not coat the whole bolt. Wipe off any that squeezes out so it doesn’t end up on carpet or a finish.

Because it works on stainless and plated hardware, it suits most fasteners on trolling motor mounts, graph mounts and transducer brackets. Keep it off plastic parts and plastic threads, since threadlockers can crack some plastics. Don’t use it on the same threads as anti-seize either. Pick one per fastener: threadlocker where vibration loosens things, anti-seize where seizing is the bigger risk.

Shipping note

This item can only be shipped within the continental United States. Our shipping policy has the rest of the details.

Quick answers

Can I take the bolt out after using blue Loctite medium strength threadlocker?

Yes. Medium strength is the removable grade, so standard hand tools will break it loose.

Does Loctite 243 work on stainless bolts?

Yes. It’s made for passive metals like stainless and plated surfaces as well as brass and copper.

Can you ship it to Alaska or Hawaii?

No. It ships within the continental United States only.

Find it with our other Loctite products, and see our trolling motor mount guide for where it’s used. Email sales@trollingmotorsdirect.org with your mount or bracket if you’re not sure which fasteners to treat.

Related products

error: Content is protected !!