Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Deck Single Monitor Mount with rail mount base (Sea Ark)

Price range: $241.00 through $266.00

A single graph mount on a rail mount base, made for the SeaArk rail system. CNC machined aluminum, 6, 8, 10 or 12 inch arm, tapped for most Humminbird, Garmin and Lowrance units. Rail hardware not included.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

This SeaArk rail single monitor mount is our single graph mount set on a rail mount base, built to work on the SeaArk rail system. It’s CNC machined aluminum, holds one graph, and comes with a 6, 8, 10 or 12 inch arm. If your boat has that rail, this is the version to look at.

Made for the SeaArk rail system

The mount works best on the SeaArk rail. Rail mounting hardware is not included, so check what your rail takes and have the right stainless fasteners ready before install day. If your boat doesn’t have the rail system, the standard deck single monitor mount bolts straight to a flat deck instead.

We keep the other parts we carry for these boats in our SeaArk section.

Before you order, decide where on the rail the graph should go. It needs to be readable from where you stand or sit, clear of the trolling motor when it stows, and out of the way of rod storage and hatches.

What comes with the SeaArk rail single monitor mount

  • Included: the CNC machined aluminum mount on its rail mount base, with the arm length you choose.
  • Not included: rail mounting hardware and the graph itself.
  • Tools: a 3/8 allen wrench for the stainless steel bolts.

Arm lengths

ArmNotes
6 inchLowest screen position
8 inchMid-low
10 inchMid-high
12 inchHighest screen position

The gallery has a ruler photo for each arm length on the rail mount base, so you can see the height before you order. Compare those to where you stand or sit when you’re watching the screen.

Graphs the SeaArk rail single monitor mount takes

Most Humminbird, Garmin and Lowrance units bolt to the predrilled, tapped plate. The Humminbird Helix 7 is the exception; it needs the Helix 7 adapter bracket, sold separately.

Holding position

Detents hold the arm where you put it. The stainless steel bolts tighten with a 3/8 allen wrench, and once the bolts are tight the mount will not lose position.

Keep a 3/8 allen in the boat if you like to change the angle between spots. Loosen, set, retighten.

Questions

Does the rail mount base come with rail hardware?

No. Rail mounting hardware is not included, so match fasteners to your rail.

Will it work on a boat without the SeaArk rail?

It’s made for the rail. For a flat deck, the standard deck single mount is the better choice.

Can I run a Helix 7 on the SeaArk rail single monitor mount?

Yes, with the Helix 7 adapter bracket. Without it, the Helix 7 won’t bolt to the plate.

Send your SeaArk model and graph to sales@trollingmotorsdirect.org and we’ll help you pick the arm length.

Additional information

Arm Length

6", 8", 10", 12"

Related products

error: Content is protected !!