Description
The Over the Side telescoping conversion kit turns our original Over the Side Mount into the Over the Side Telescoping Tall Mount. If your mount sits too low for how you fish, this adds height you can adjust, and the kit includes everything you need for the switch. Like the mount it upgrades, it’s heavy duty, and it’s machined and assembled in the USA.
What changes after the conversion
Once converted, the mount swivels and telescopes:
- Loosen the knob on the base and the vertical and horizontal tubes swing a full 360 degrees.
- Loosen the knob on the vertical tube, slide it up, and tighten it when you reach the height you want.
- At the far end, the vice knob tightens into the machined side to hold your Live Sweep, Handscope or Cable Steer.
All three are knobs, so you can change height or swing the gear in over the deck without reaching for a wrench.
About the photos
The main photo shows the components that come in the kit. Some thumbnails show the finished Telescoping Tall Mount, including shots beside a ruler both collapsed and extended, so you can see the height range before you order. Those thumbnails show the whole mount, so don’t expect a second base or arm in the box.
Who the Over the Side telescoping conversion kit is for
- You already own our original Over the Side Mount and want it taller.
- You fish from a raised deck and the pole sits awkwardly low.
- You want to set a different height for different boats or styles of fishing.
If you don’t own an Over the Side Mount yet, skip the kit and buy the Over the Side Telescoping Tall Mount complete. If you’re happy with the height you have, the original Over the Side Mount stays as it is.
After the Over the Side telescoping conversion kit is on, set the final height with the transducer in the water. A few inches up or down on the vertical tube changes how deep the transducer rides and how much of the pole the wind and current push on.
If you’re pairing the taller mount with new electronics, Wired2Fish’s write-up on Humminbird’s MEGA Live 2 is a good read. Bases and adapters are in over the side mounts.
Questions we get
Does the Over the Side telescoping conversion kit fit the Mini or Off Shore mounts?
It’s listed for converting our original Over the Side Mount. For any other model, email us before ordering.
Do I need extra parts?
No. The kit includes everything needed to convert the original mount to the Telescoping Tall version.
What if it doesn’t suit my mount?
Unused, within 30 days. See our returns policy.
If you can’t tell which Over the Side Mount you have, email a photo to sales@trollingmotorsdirect.org and we’ll confirm the kit fits.















