Description
If you fish a SeaArk with a gunnel rail, this 4 pole launch pad gunnel rail mount lets you hang our 4 Pole Launch Pad off that rail instead of screwing it to the floor. That keeps four rods standing up along the side, out of the walkway, where you can grab one without bending over. It’s machined from heavy duty aluminum with a tumbled finish, and made in the USA.
What this mount does
SeaArk boats with a rail along the gunnel are what this plate is designed around. The 4 pole launch pad gunnel rail mount bolts to that rail and gives the pad a fixed spot to sit, so the rods ride vertically next to you.
It’s the mount only. The 4 Pole Launch Pad itself is its own listing, and you can see the other options in our launch pad section.
Choosing the track degree
The 4 pole launch pad gunnel rail mount comes in three track angles: 25, 45 and 90 degrees. All three cost the same, so the only question is which angle sits right on your boat.
- 25 degree
- 45 degree
- 90 degree
The right one depends on the shape of the rail and gunnel on your boat and how you want the launch pad to sit. If you can’t tell from the photos, send us your model and year, plus a photo of the rail if you can, and we’ll tell you which angle to order.
Fitting tips
This plate was designed for that factory rail. On another brand of boat it may or may not line up, so measure before you count on it.
Set it where your hand naturally goes when you reach for a rod, and check that the rods clear any canopy frame, rail-mounted lights or a gunwale cap that sticks out. The tumbled finish is bare aluminum smoothed by tumbling rather than a coating, so there’s no paint to chip.
Once it’s on, load four rods and take a short run before the first real trip. Watch how the tips move over bumps and adjust the spot if any of them reach a passenger seat or swing toward the water.
Questions
Does the 4 pole launch pad gunnel rail mount include the launch pad?
No. This is the rail mount by itself. Order the 4 Pole Launch Pad separately if you don’t already have one.
Will it fit a boat that isn’t a SeaArk?
It was made for the gunnel rail on SeaArk boats. Other hulls might work, but check the rail profile first or email us a photo.
Can I return it if I pick the wrong angle?
Unused, non-electronic items can come back within 30 days. See our returns policy for how it works.
Questions about your rail? Email sales@trollingmotorsdirect.org with your SeaArk model and year and we’ll help you choose the right 4 pole launch pad gunnel rail mount angle.












