Description
This MEGA 360 Ultrex Quest Bracket is the low pro mounting bracket on its own, with bolts and spacers, for hanging a Humminbird MEGA 360 off a Minn Kota Ultrex Quest. It fits the Ultrex Quest only. It’s black powder coated and made in the USA.
Bracket only or the full kit
There are two ways to buy into a Quest 360 setup from us. The full Ultrex Quest mounting hardware includes a low pro bracket, bolts and the 360 dog bone clamp. This one is the bracket with its bolts and spacers, and no clamp.
The bracket alone suits you if you already have a clamp, you’re replacing a damaged bracket, or you want a second Quest boat ready for the 360. If you’re starting from nothing, the full kit means you aren’t hunting for a clamp after the bracket shows up. Both live in our MEGA 360 mounts section.
MEGA 360 Ultrex Quest Bracket details
- Fits: Minn Kota Ultrex Quest only
- Style: low pro 360 mounting bracket
- Included: the bracket, bolts and spacers
- Not included: dog bone clamp, the MEGA 360, the motor
- Finish: black powder coated
- Made in the USA
Lay the bolts and spacers out next to the bracket and match them to the product photo before you start. The spacers are part of the install, so don’t leave them in the bag.
Fitting tips
Our complete Quest kit puts the 360 on the port side of the motor, so plan cable runs and anything else on that side around it. Leave a little slack in the 360 cable where it crosses to the motor so steering and stowing don’t pull on it.
Before you tighten anything, stow the motor and hold the bracket in place. Check that the 360 will clear the deck and the motor’s mount as it folds, then deploy it again and look at where the 360 sits in the water.
Powder coat is tough, but it can chip where a tool slips, so use one that fits the bolt heads properly and go easy on the last turn. A dab of anti-seize on stainless threads makes them easier to pull later, which matters most if you fish salt.
Questions
Will the MEGA 360 Ultrex Quest Bracket fit a regular Ultrex?
No. For the original Ultrex, use the MEGA 360 Ultrex bracket instead.
Does it include the clamp?
No, just the bracket, bolts and spacers. The full mounting hardware kit adds the 360 dog bone clamp.
Where can I read about the Quest itself?
Minn Kota’s Ultrex Quest page lists the motor’s shaft lengths and features. If you ordered the wrong bracket, an unused one can come back within 30 days under our returns policy.
Email sales@trollingmotorsdirect.org with your Quest’s shaft length and a photo of the bow, and we’ll check the MEGA 360 Ultrex Quest Bracket fit before you order.









