Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Console Single Mount – 4″, 6″, 8″, 10″ or 12″ arm – Scratch & Dent

Price range: $158.00 through $178.00

Our adjustable console single mount with cosmetic finish flaws. 360 degree knuckle base, 30 degree rotating top plate, 4″ to 12″ arms, 6061 aluminum. Sold as is, final sale, no returns.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns
SKU: 800-SD
Category: ,

Description

Finish flaws are what separate this console single graph mount scratch and dent unit from our regular adjustable console mount. Mechanically it’s the same: 360 degree knuckle base, a top plate that rotates 30 degrees each way and arms from 4″ to 12″. It’s sold as is, with no returns or refunds.

About the flaws

These are cosmetic. A unit may show one or more of the following:

  • Scratches in the finish
  • Machining defects in the finish
  • Color defects
  • Nicks in the finish

Each piece is different, and we can’t choose which marks yours will have. If you need a flawless finish, order the new console single mount instead.

How the console single graph mount scratch and dent unit adjusts

The base plate knuckle rotates 360 degrees and locks into several indents. The arms have several adjustment points to get the screen where you want it. The top plate turns 30 degrees in either direction for glare and for pointing the screen at a passenger.

The top plate is tapped for multiple depth finders but won’t fit the Helix 7 without the separate Helix 7 adapter bracket.

Console single graph mount scratch and dent, shown in several arm lengths

Arm length options

Choose 4″, 6″, 8″, 10″ or 12″. Short arms keep the screen low under a windshield; long arms lift it over gauges or a wheel. Measure from where the base will bolt to where you want the center of the screen before you choose, because this one can’t come back if the length is wrong.

Sit at the helm with a tape measure and check three things: the screen clears the wheel, it doesn’t block a gauge you need, and you can still see over it when running. That tells you the arm length better than a guess.

Build and install

It’s 6061 aircraft aluminum with stainless steel screws, manufactured and assembled in the USA. 6061 is a strong, corrosion-resistant alloy, and a scratch on the surface doesn’t change that. Adjustments use standard Allen wrenches, and console mounting hardware isn’t included.

Add-ons that work with the new version work with this one too: the CA Base hides the wire hole for a cleaner install, and the Swivel Mount Base Adaptor Assembly lets the console single graph mount scratch and dent unit swivel. Both are sold separately.

Questions

Can I return a console single graph mount scratch and dent item?

No. Scratch and dent parts are final sale, as our returns policy explains.

Does it work the same as a new one?

The listed defects are all cosmetic, in the finish. The knuckle, arms and top plate adjust the same way. If you’d like more detail before you buy, email us.

Other marked-down parts sit in our scratch and dent category. Email sales@trollingmotorsdirect.org with your console and graph for help picking an arm length.

Additional information

Arm Length

4", 6", 8", 10", 12"

Related products

error: Content is protected !!