Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Swivel Single Mount

Price range: $266.00 through $310.00

Swivel single deck mount with a 5″, 6″, 8″ or 10″ riser that lifts off the base. Swivels for sun glare or position. Plate fits all graphs except Helix 7 (plate sold separately). Deck hardware not included.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

The swivel single deck mount carries one graph on a riser that turns at the base, so you can aim the screen or swing it out of the glare. Choose a 5, 6, 8 or 10 inch riser, and lift the riser off the base when you want the deck clear.

Picking a riser height

Riser height sets where the screen lands. The 5-inch and 6-inch risers keep a graph low, which suits a console or a spot where you need to see over it. The 8-inch and 10-inch risers lift it toward eye level when you stand on the front deck.

To choose, stand where you fish and measure from the deck to where you’d like the middle of the screen. Subtract the height of your graph and its bracket, then pick the closest riser.

How the swivel single deck mount works

The whole mount swivels at the base to adjust for sun glare or position. Turn it toward the driver for the run, toward the bow when you’re fishing, or a few degrees off when the sun sits behind you.

The riser can be removed from the base. Leave the swivel base on the deck and take the riser and graph home, or stow them in a locker for the drive. Less on the deck also means less to snag a cast on.

Graph fit

The mounting plate fits all graphs except the Humminbird Helix 7. For that unit, the Helix 7 adapter bracket is available separately.

That covers newer Humminbird screens like the Xplore series along with the Garmin and Lowrance graphs our customers run. If your screen came with a gimbal bracket, it should go straight on.

Build and install

  • CNC machined aluminum with an anodized finish
  • Standard stainless steel Allen head bolts throughout
  • Deck mounting hardware not included
  • Made in the USA

On an aluminum deck, consider an under plate below the base. Our Universal Under Plate lists the swivel base and single deck mounts among what it fits.

If you’re comparing, the swivel single deck mount is the simpler choice next to our telescoping swivel mounts. Height is set by the riser you pick, not a sliding tube, so there’s nothing to adjust once it’s on.

Run the graph cables with a little slack at the base so the mount can turn both ways without tugging on a plug.

Questions

Can I take the riser off the swivel single deck mount?

Yes. The riser comes off the base, so you can store the graph and riser off the boat.

Does it fit a Helix 7?

Not on its own. Add the Helix 7 adapter bracket.

Is deck hardware included?

No. You’ll need your own stainless fasteners.

See all our single graph mounts, or email sales@trollingmotorsdirect.org with your boat and graph model for help choosing a riser.

Additional information

Riser Height

5", 6", 8", 10"

Related products

error: Content is protected !!