Description
Garmin’s 1643 is a 16″ screen with real weight to it, and this Garmin 1643 deck mount is built to carry it on the front deck or the console. You choose a stationary double arm frame or a riser swivel base, each in 6″, 8″ or 10″. Both versions come with a MEGA base adaptor plate and an under plate that clamp the deck between them.
Double arm or swivel: picking your Garmin 1643 deck mount
The double arm stationary mount is the simple choice. Set the angle, tighten it, and it stays there. It suits a console or any spot where you always look at the screen from the same seat.
The riser swivel version moves with a knob. Loosen it and the monitor turns right or left, a full 360 degrees if you want it. With the knob loose you can also lift the whole monitor off the swivel base, so it rides in the truck or the house instead of on the trailer.
| Mount type | Sizes offered | How it moves |
|---|---|---|
| Double mount (stationary) | 6″, 8″, 10″ | Fixed once tightened |
| Riser swivel mount | 6″, 8″, 10″ | Turns 360 degrees on the knob, monitor lifts off |
The size sets how tall the mount stands. Taller suits people who fish standing most of the day, shorter keeps the screen low on a console.

Why the deck gets sandwiched
A big display on a tall mount pries hard on a few bolts once the boat starts pounding through chop. That’s the reason the kit includes the MEGA base adaptor plate on top and an under plate below. Bolted through, the two plates squeeze the deck between them and spread the load over a wider area instead of a few small holes.
Before you drill, look under the deck. Wiring runs, livewell plumbing and storage lid frames all tend to live where you want the mount. Leave room to get a wrench on the under plate nuts.
Build and finish
The frame, arms and base are CNC machined aluminum with a black and clear anodize finish, machined and assembled in the USA. If you’re still shopping for the screen itself, we carry the Garmin GPSMAP1643, and the rest of our single monitor mounts cover other screen sizes. For a general rundown of what a 16″ chartplotter does on a fishing boat, that page is a good primer.
Questions
Can I take the screen off when I leave the boat?
With the riser swivel version, yes. Loosen the knob and lift the monitor off the base. The double arm stationary version is meant to stay put.
Which Garmin 1643 deck mount size should I get?
Think about where your eyes are when you fish. Standing at the bow, the 8″ or 10″ brings the screen up. On a console with a windshield, the 6″ usually keeps it out of your sight line.
Is the under plate really needed?
It comes with the mount for a reason. On thin or soft decks it’s what keeps a heavy screen from working the bolts loose.
Want a second opinion before ordering? Email sales@trollingmotorsdirect.org with your boat, deck layout and Garmin model, and we’ll help you choose the right Garmin 1643 deck mount setup.









