Description
A Garmin Force skeg is the fin under the motor that takes the hit when you drag across a stump or a rock bar, and sooner or later it pays for doing that job. This is Garmin’s standard replacement skeg for Force trolling motors, in black or white. It’s a new Garmin part.
What the skeg does
The skeg hangs below the motor housing. When you ride over cover, it touches first and helps the lower unit ride up and over, keeping the prop and the nose away from the worst of it. A cracked or missing skeg leaves the prop more exposed, so replace it once it’s split or worn down.
Run your hand along it after a day in timber or riprap. Small gouges are normal. Cracks at the screw holes or a missing chunk at the tip are the signs it’s time. If you fish heavy cover, a spare Garmin Force skeg and a 4 mm hex key in the boat turn a broken fin into a quick fix at the ramp.
Black or white
Pick the color that matches your motor. In our listing the two options differ only in color, and both are the standard Force replacement skeg.
Changing a Garmin Force skeg
- Disconnect the motor from power.
- Remove the four screws holding the skeg with a 4 mm hex bit or wrench.
- Clean the mating surface and check the screws for corrosion or rounded heads.
- Fit the new skeg and reinstall the four screws. Garmin’s manual has you reuse the originals.
If you’re also changing the nose cone, Garmin’s service steps take the skeg off first anyway, so it’s a good time to do both. While you’re down at the lower unit, look at the prop, the prop nut and the anode on the shaft.
The skeg steps are in Garmin’s Force owner’s manual, alongside the prop and nose cone procedures. If the prop took a hit too, the Garmin high-efficiency prop is the standard replacement.
Skeg questions
Does the Garmin Force skeg come with screws?
Garmin’s instructions reuse the four existing screws. If yours are corroded or stripped, email us before ordering and we’ll check what’s available.
Will it fit a Kraken?
It’s listed as the replacement skeg for Force motors. Email us with your Kraken model and we’ll check before you buy.
What about returns and shipping?
Read our returns policy before ordering. Free ground shipping applies on orders of $199 or more to the lower 48 and DC; see our shipping policy.
Send your motor model and color to sales@trollingmotorsdirect.org and we’ll confirm the replacement skeg. For other wear parts, see our trolling motor parts guide and the Garmin accessories category.









