Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Garmin GT36-TM and GT8HW-IH

$549.99

Two-transducer kit (010-02536-00): a GT36UHD-TM transom mount for UHD ClearVü and SideVü, a GT8HW-IH high-wide CHIRP in-hull, and the Y-cable to join them into one 12-pin plug. For fiberglass hulls with 0° to 6° deadrise.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

The Garmin GT36UHD-TM and GT8HW-IH bundle puts two transducers and the cable to join them in one box, part number 010-02536-00. You get Ultra High-Definition ClearVü and SideVü scanning from the transom-mount GT36UHD-TM, plus high-wide CHIRP traditional sonar from the GT8HW-IH, which mounts inside a fiberglass hull. Garmin aims it at coastal and offshore anglers who want clean fish arches and a clear picture of structure below and beside the boat.

What’s in the box

  • GT36UHD-TM transom mount transducer with a 12-pin connector
  • GT8HW-IH in-hull transducer with an 8-pin connector
  • Y-cable that takes the 12-pin and 8-pin transducer plugs and joins them into one 12-pin plug for your sounder

Both transducers are designed to keep accurate depth readings at high speed, which matters on a long run offshore. Garmin lists this kit among its GT36-TM transducer bundles.

Check your hull before ordering the Garmin GT36UHD-TM and GT8HW-IH bundle

This version is for fiberglass hulls with a deadrise of 0° to 6° where the GT8HW-IH will sit. An in-hull transducer shoots through the hull itself, so it isn’t an option on an aluminum boat.

Garmin also makes a GT36 bundle with the GT15M-IH, a mid-band CHIRP in-hull for fiberglass hulls with 0° to 25° of deadrise. If your hull is steeper than 6°, that’s the one to ask us about; it isn’t this listing.

How the two transducers split the work

The GT8HW-IH handles traditional sonar. Its high-wide CHIRP gives crisp fish arches and good target separation. The GT36UHD-TM on the transom does the scanning: ClearVü draws a picture-like view straight down, and SideVü shows structure and fish off each side. Garmin’s manual page on the ClearVü sonar view explains how the fan-shaped scanning beam differs from a cone.

Because the Y-cable ends in a single 12-pin plug, your display needs a 12-pin Garmin transducer port that supports both CHIRP and scanning sonar. Send us the model and we’ll confirm the Garmin GT36UHD-TM and GT8HW-IH bundle will work with it.

Install notes

Run each transducer cable to the helm on its own path and join them at the Y-cable behind the display. For the GT8HW-IH, choose a spot in solid fiberglass, away from strakes and anything that traps air. Read Garmin’s installation instructions for each transducer before you drill the transom.

Questions

Will the Garmin GT36UHD-TM and GT8HW-IH bundle work on an aluminum boat?

No. The GT8HW-IH is an in-hull transducer for fiberglass only. On aluminum, a transom mount like the GT56UHD-TM gives CHIRP and UHD scanning in one housing.

Can I buy the GT36UHD-TM by itself?

Yes, we list the GT36UHD-TM on its own with transom and trolling motor hardware. On its own it has no traditional sonar, which is what the GT8HW-IH adds.

Can I send it back if it doesn’t suit my hull?

Transducers are final sale under our returns policy, so check deadrise and hull material first.

See more Garmin transducers, or email sales@trollingmotorsdirect.org with your hull material, deadrise and Garmin display model and we’ll confirm the fit.

error: Content is protected !!