Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Garmin Bail Mount With Quick Release For EchoMap Ultra 2 10in

$249.99

Garmin’s tilting bail mount with quick release cradle for 10-inch ECHOMAP Ultra 2 chartplotters (010-13352-02). Your cables plug into the cradle, so the screen lifts off without unplugging anything.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

This ECHOMAP Ultra 2 10 inch bail mount is Garmin’s surface mount with a quick release cradle, part 010-13352-02. The bail bolts down, the knobs let you tilt the screen to the angle you want, and the cradle holds the cable connections. Lift the graph out and the wiring stays put.

Garmin ECHOMAP Ultra 2 10 inch bail mount with tilt knobs and quick release cradle
Bail, knobs and quick release cradle for the 10-inch ECHOMAP Ultra 2.

What fits it

Garmin lists 010-13352-02 as compatible with ECHOMAP Ultra 2 10-inch chartplotters. It’s sized for the 10-inch screen. The 12-inch Ultra 2 has its own version, which we carry as the bail mount for the ECHOMAP Ultra 2 12in.

It isn’t listed for the first-generation ECHOMAP Ultra, ECHOMAP UHD2 or GPSMAP units, so check the label on the back of your graph before you order.

In the box

  • Bail mount (with the tilt knobs)
  • Quick release cradle

That’s the full list Garmin gives. Plan on your own fasteners suited to whatever you’re bolting it to.

Why people buy a second cradle

A quick release cradle is the part your power and sonar cables plug into. Once a boat has its own cradle wired up, the screen just clicks in and out. That opens up a few practical setups:

  • Two boats, one graph: wire a cradle on each boat and carry the unit between them.
  • Take it home: pull the screen when you leave the boat so it isn’t sitting in an unattended rig overnight.
  • Replacement: a cracked cradle or a lost knob leaves you with a wobbly screen, and a new ECHOMAP Ultra 2 10 inch bail mount fixes both.

Mounting the ECHOMAP Ultra 2 10 inch bail mount

Pick a flat, solid spot with room behind the cradle for the cables to bend without kinking. Hold the graph in place before drilling and tilt it through its range so it clears the windshield, the steering wheel and your knees.

On fiberglass, drill a small countersink through the gel coat first so the screw holes don’t spider-crack. If you’re putting the bail on one of our machined graph mounts, tell us which plate you have and we’ll confirm the hole pattern works.

Garmin’s own listing is on the 010-13352-02 product page.

ECHOMAP Ultra 2 10 inch bail mount questions

Does it include a cover?

No. The matching ECHOMAP Ultra 2 10in protective cover is sold separately.

Do I have to rewire anything?

If you’re replacing an existing quick release cradle, the cables move over to the new one. A second boat needs its own power and transducer wiring run to the cradle.

Other Ultra 2 parts are in Garmin graph accessories. Email sales@trollingmotorsdirect.org (Monday to Friday, 9am to 6pm) with your graph model and where you plan to mount it, and we’ll make sure it’s the right part.

Related products

error: Content is protected !!