Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Humminbird Mega 360 Imaging No Mount

$1,199.99

Humminbird MEGA 360 Imaging with a 50 inch shaft and no mounting bracket (model 411580-1). Includes power, HELIX and SOLIX cables. You supply the mount: a Humminbird accessory mount or a third-party one.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

Sold without a bracket, the Humminbird MEGA 360 No Mount (model 411580-1) is a MEGA 360 Imaging transducer on a 50 inch shaft, so you choose how and where to mount it. You still get the full 360 degree MEGA Imaging view around the boat; you just supply the mounting solution.

Plan your mount before you order

Humminbird is clear that this model needs an accessory or third-party mount to work as intended. Its own listed options are the Ultrex MEGA 360 Hardware Kit and the MEGA 360 Ice Adapter, which also makes this version a fit for hard-water setups.

We stock machined MEGA 360 mounts for several trolling motors. Those list fit for the original 360 and the Fortrex and Ultrex versions, so email us before pairing one with the 50 inch shaft model.

Two sonar modes

The Humminbird MEGA 360 No Mount runs as a 360 Imaging source, or you can switch it to Side Imaging mode and use the same transducer as a side imaging source. On an Ethernet network, either view can be shared to other compatible Humminbird units. Humminbird’s MEGA 360 page lists XPLORE, APEX, SOLIX and HELIX units with MEGA Imaging+ as compatible displays.

What’s in the box

  • 50 inch MEGA 360 Imaging pod and shaft assembly, with power and transducer cables
  • One 10 ft MEGA 360 power cable
  • One 10 ft HELIX transducer extension cable
  • One 10 ft SOLIX transducer extension cable

No bracket, clamp or trolling motor is included. Humminbird backs it with a 1-year limited warranty.

Mounting tips for a 50 inch shaft

Whatever mount you use, it has to hold the shaft rigid, keep the pod below the hull in the water you fish, and let you raise it before running. A wobbly mount shows up as smeared returns, so tighten everything and check it after the first trip.

Quick answers

Why buy the Humminbird MEGA 360 No Mount over the Ultrex or Fortrex kit?

Choose it when neither kit’s bracket fits your plan, such as an ice setup, a custom mount or a motor without a direct kit.

Which cables do I use for my graph?

The Humminbird MEGA 360 No Mount box has both a 10 ft HELIX extension and a 10 ft SOLIX extension. Use the one that matches your unit, plus the 10 ft power cable.

Can the 50 inch shaft be cut?

Humminbird doesn’t mention it, and we wouldn’t. Plan the mount around the shaft as supplied.

As electronics, it’s final sale (see our returns policy). Browse Humminbird transducers, or see the full range of MEGA 360 versions on Minn Kota’s 360 Imaging page, where Humminbird’s sonar is now sold. Email sales@trollingmotorsdirect.org with your boat, motor and graph and we’ll help you work out a mount.

Related products

error: Content is protected !!