Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Humminbird Mega Live 2 Imaging

$1,599.99

Humminbird’s MEGA Live 2 live sonar (model 710310-1). Mounts on either side of the trolling motor shaft and connects to APEX, SOLIX G3 or XPLORE MEGA SI/DI units by the included Ethernet cable. Trolling motor not included.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

Humminbird MEGA Live 2 Imaging (model 710310-1) is Humminbird’s live sonar for the trolling motor shaft. It shows fish, bait and your lure moving in real time, with MEGA Imaging detail across the whole view and no gaps in coverage. It plugs into APEX, SOLIX G3 and XPLORE units by Ethernet, with no separate sonar box to mount.

Three ways to look

There are three viewing modes. Forward shows what’s ahead of the boat, Down looks under the trolling motor, and a wide horizontal mode shows what’s out and around the boat. Coverage is 20 x 120 degrees.

Humminbird tuned the cone angle to cover plenty of water while still letting you pick out a single fish, and bait and lure tracking follows your offering as it moves. Custom color palettes help separate fish from brush and bottom.

Will it work with your graph and motor?

QuestionAnswer
Which graphs?All APEX, SOLIX G3 and XPLORE models, as long as it’s a MEGA Side Imaging or MEGA Down Imaging model
How does it connect?Included Ethernet cable; no external sonar box
Other sonar on the same head?Yes, alongside MEGA 360 or Built-in MEGA Imaging
Which motor side?Mounts on either side of the trolling motor shaft
Recommended motorsAny Minn Kota Ultrex, a Minn Kota Fortrex, or any QUEST motor with Built-in MEGA Imaging

Those motors are Humminbird’s recommendation for the best sonar performance. On another motor, send us the model before you order.

Marking spots on the live screen

Add a GPS heading sensor and you can mark and view waypoints right on the live sonar screen, so a school you saw today is easy to find next trip. Humminbird names the AS GPS HS for this. XPLORE lists only the NMEA 2000 heading sensor, so on an XPLORE use the AS GPS HS N2K.

What’s in the Humminbird MEGA Live 2 Imaging box

  • MEGA Live 2 transducer with adjustable mounting bracket
  • 10 ft power cable
  • 20 ft Ethernet cable
  • Mounting hardware

The trolling motor is not included. Humminbird covers it with a two-year warranty.

Install notes

Follow Humminbird’s installation guide for bracket position on the shaft. Run the power and Ethernet cables along the motor so they don’t snag when you steer, stow or deploy, and leave a service loop at the head. Power the Humminbird MEGA Live 2 Imaging from a fused circuit, and check that the 20 ft Ethernet cable reaches your graph along its real route.

Quick answers

Does Humminbird MEGA Live 2 Imaging work with HELIX?

HELIX isn’t on the list for this unit. Humminbird keeps a current MEGA Live 2 compatibility article if you want to check other units.

Can I run MEGA 360 and MEGA Live 2 on one graph?

Yes. MEGA Live 2 connects by Ethernet and can share the head with MEGA 360 or Built-in MEGA Imaging.

Can I return it?

No. Like all electronics, it’s final sale under our returns policy.

Read our MEGA Live guide, browse Humminbird transducers, or see Humminbird’s MEGA Live 2 page and installation guide. Email sales@trollingmotorsdirect.org with your boat, trolling motor and graph and we’ll confirm the setup.

Related products

error: Content is protected !!