Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Humminbird Xplore 9 CHO No Transducer

$1,299.99

The 9 inch XPLORE MEGA SI+ as a control head only (model 412000-1CHO). No transducer in the box. Use it with Built-in MEGA Imaging, MEGA Live 2, MEGA 360 or your own compatible transducer.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns
SKU: HUM4120001CHO
Category: , , ,

Description

Humminbird Xplore 9 No Transducer (model 412000-1CHO) is the 9 inch XPLORE MEGA SI+ control head only, with no transom transducer. It’s a tidy bow unit: small enough to stay out of your way on the casting deck, and it runs MEGA Imaging from the trolling motor or forward-facing sonar over Ethernet.

What it connects to

Humminbird’s spec sheet lists these sonar and boat-control partners for the XPLORE:

  • Minn Kota Built-in MEGA Side Imaging and MEGA Down Imaging, plus Minn Kota US2 sonar
  • MEGA Live 2 forward-facing sonar and MEGA 360 Imaging
  • Minn Kota i-Pilot Link and Advanced GPS Navigation, Talon and Raptor anchors
  • Humminbird CHIRP Radar and the 5-port Ethernet switch
  • NMEA 2000 networks and the One-Boat Network

It also takes optional 50/83/200 kHz transducers and Airmar High, High Wide, Medium, Medium Wide and Low ducers if you’d rather pick your own.

Charts come in the box too. The Basemap covers 10,000+ lakes and the U.S. coast, the VX card adds LakeMaster and CoastMaster standard data for the U.S. and Canada, and AutoChart Live records 8 hours of your own contours. Fish spots sync to your phone with custom colors and icons.

Adding a heading sensor

XPLORE works with Humminbird’s NMEA 2000 GPS heading sensor, not the older non-NMEA version. If you want accurate waypoints off MEGA 360 or MEGA Live 2, the AS GPS HS N2K is the one to pair with this head. It connects to an NMEA 2000 backbone or straight to the unit with its direct cable. On the Humminbird Xplore 9 No Transducer, that sensor also keeps your heading correct on the chart while the boat sits still.

Humminbird Xplore 9 No Transducer specs

  • 9 in color TFT touchscreen, 1280 x 720, with keypad and view preset keys
  • MEGA Side Imaging+, MEGA Down Imaging+ and Dual Spectrum CHIRP processing (Narrow, Wide and Full modes)
  • Internal GPS, Humminbird Basemap, and an included LakeMaster and CoastMaster VX card with U.S. and Canada standard data
  • AutoChart Live with 8 hours built in; dual micro SD slots
  • Ethernet, NMEA 2000, Wi-Fi and Bluetooth; software updates through the One-Boat App
  • 10.8-20 VDC power input; gimbal mount standard, 11.690 in W x 6.569 in H x 3.884 in D
  • 2-year limited warranty

Common questions

Can the Humminbird Xplore 9 No Transducer show sonar without anything else?

No. It needs a source such as Built-in MEGA Imaging, MEGA Live 2, MEGA 360 or a compatible transducer.

Does it support AIS or HDMI?

Neither is supported on XPLORE. Look at APEX if you need HDMI.

Can it go in the dash instead of on a bracket?

Yes. The standard mount is a gimbal, and Humminbird offers an optional in-dash mounting kit.

The Xplore 9 CMSI+ is the same head with the XM 14 HW CMSI T transom transducer included. More units are listed under Humminbird graphs, and Humminbird’s help center has the current MEGA Live 2 compatibility list. Electronics are final sale, so email sales@trollingmotorsdirect.org with your boat, trolling motor and other graphs before you order.

Related products

error: Content is protected !!