Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Humminbird Xplore 12 CHO No Transducer

$2,699.99

The 12.1 inch XPLORE MEGA SI+ sold as a control head only (model 412020-1CHO), no transducer. A big screen for running MEGA 360, MEGA Live 2 or Minn Kota Built-in MEGA Imaging, with LakeMaster charts included.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns
SKU: HUM4120201CHO
Category: , , ,

Description

Humminbird Xplore 12 No Transducer is the 12.1 inch XPLORE MEGA SI+ sold as a control head only, model 412020-1CHO. A 12.1 inch screen earns its keep when you’re splitting it between MEGA 360, forward-facing sonar and a chart, and that’s the buyer this version is for: someone whose sonar comes from the trolling motor or the network, not a transom ducer.

Back of the Humminbird Xplore 12 no transducer control head

A multi-sonar bow setup

One way to stack sonar on a single head, using only gear from the XPLORE compatibility list:

  1. MEGA 360 Imaging on the trolling motor for a sweep all the way around the boat
  2. MEGA Live 2 on the motor shaft, connected by Ethernet
  3. Built-in MEGA Side and Down Imaging, or US2 sonar, from a compatible Minn Kota
  4. CHIRP Radar or other Ethernet gear through the 5-port switch

Add the NMEA 2000 GPS heading sensor and waypoints you drop on the MEGA 360 screen are placed more accurately.

Humminbird Xplore 12 No Transducer specs

  • 12.1 in color TFT, 1280 x 800, touch plus keypad, view preset keys
  • MEGA SI+ processing: 250 ft MEGA and 800 ft at 455 kHz side to side; MEGA DI+ 200 ft MEGA and 400 ft at 455 kHz
  • Dual Spectrum CHIRP in Narrow, Wide and Full modes; 2.5 in target separation
  • Internal GPS, Basemap, included LakeMaster and CoastMaster VX card, Navionics compatible
  • AutoChart Live with 8 hours built in; dual micro SD
  • Ethernet, NMEA 2000, Wi-Fi, Bluetooth; no HDMI, no AIS
  • 10.8-20 VDC input; gimbal footprint 14.145 in W x 8.911 in H x 3.989 in D
  • 2-year limited warranty

Mounting and what isn’t included

On its gimbal the head is just over 14 inches wide, which is a lot of bow panel. Measure your deck space, and consider whether a 9 or 10 inch fits better up front; an in-dash kit is optional for console installs.

The Humminbird Xplore 12 No Transducer has no transducer, so plan your sonar source before you install. If you’d rather have the transom ducer in the box, the Xplore 12 CMSI+ includes the XM 14 HW CMSI T.

Before you order

Can the Humminbird Xplore 12 No Transducer run MEGA 360 and MEGA Live 2 together?

XPLORE lists both as compatible. MEGA Live 2 uses Ethernet and MEGA 360 uses the sonar side, so ask us about the cabling for your exact setup.

Does it control my Minn Kota?

Yes, through the One-Boat Network: i-Pilot Link, Advanced GPS Navigation and Talon or Raptor anchors.

Can I return it if my plans change?

Electronics are final sale under our returns policy, so confirm the setup with us first.

More options are under Humminbird graphs, and the XPLORE product page has Humminbird’s full spec list. Electronics are final sale, so email sales@trollingmotorsdirect.org with your boat, trolling motor and planned sonar before you buy.

Related products

error: Content is protected !!