Description
The Lowrance Ghost prop kit (000-15237-001) is Lowrance’s own replacement prop for the Ghost trolling motor. Lowrance says the same prop fits the Ghost X. It doesn’t fit the Recon, which takes a different prop.
Which motors the Lowrance Ghost prop fits
- Lowrance Ghost: yes, it’s the Ghost’s prop kit.
- Lowrance Ghost X: yes, per Lowrance’s Ghost X FAQ.
- Lowrance Recon: no. Lowrance lists the Ghost prop as not compatible. Use the Recon 2-blade weedless prop.
- Other brands: not listed. Garmin and Minn Kota motors use their own props.
A prop is a wear part. Replace it if a blade is chipped, bent or cracked, if the motor starts to vibrate at speed, or if the drive pin has sheared. A spare in the boat turns a bad day on the rocks into a quick fix at the ramp.
Changing the prop
Lowrance’s Ghost owner’s manual lays out the swap. Unplug the motor from the batteries first.
- Use a 17 mm deep socket on the prop nut. Lowrance says not to use power tools to remove or install it.
- Pull the old prop and check the drive pin and prop shaft. If the shaft is damaged, the manual says to contact a service center.
- If the drive pin needs replacing, tap it out gently from one side.
- Clean the shaft threads and put anti-seize on them before the nut goes back on. Lowrance notes it isn’t needed with a brass nut.
- Line the drive pin up with the slot in the new prop, then torque the nut to 13 Nm (10 lbf-ft).
If you’re out of anti-seize, we stock anti-seize for salt water applications.
Brackish water and the anode
Lowrance builds the Ghost as a freshwater motor. Its manual says a sacrificial anode, sold separately, is required for brackish water. The Lowrance prop shaft anode installs over the prop nut on the back of the prop, so the easiest time to fit it is while the new Lowrance Ghost prop goes on.
Our Lowrance Ghost guide covers the rest of the motor’s parts, and the full list is in Lowrance trolling motor accessories.
Ghost prop questions
Does the Lowrance Ghost prop fit the Recon?
No. Lowrance lists the Ghost prop as not compatible with the Recon.
What torque does the prop nut need?
13 Nm (10 lbf-ft), per the Ghost manual. Use a torque wrench, not an impact.
Can I return the Lowrance Ghost prop if I change my mind?
No. Lowrance parts are sold with our electronics, and those are final sale under our returns policy. Send us your motor model first if you’re unsure.
Email sales@trollingmotorsdirect.org with your Lowrance motor and shaft length, and we’ll confirm the prop before you order.









