Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Lowrance Active Imaging 3in1 Transducer

$409.99

Lowrance Active Imaging 3-in-1, part 000-14489-001. Medium/High CHIRP sonar, SideScan and DownScan at 455/800 kHz, plus water temperature, on a 25 ft cable with a 9-pin connector. Transom, flush step or jackplate mount.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

The Lowrance Active Imaging 3-in-1 transom transducer puts CHIRP sonar, SideScan and DownScan Imaging in one housing, and reads water temperature too. It’s part 000-14489-001, with a 25 ft (7.6 m) cable and a 9-pin connector. One transducer, one install, and Lowrance’s three core sonar views on your screen.

How Active Imaging gets its detail

Lowrance built Active Imaging with separate elements for SideScan transmit and receive. Splitting those jobs lets the transducer ping faster, and ping speed is what drives image resolution. The same design aims more of the signal out to the sides, which is where the extra range comes from.

The housing is made from a polymer that Lowrance says responds to sound more like water does, so less signal is lost going out and coming back. Alongside the imaging, a Medium/High CHIRP sonar element gives you the regular 2D sonar view.

Lowrance Active Imaging 3-in-1 transom transducer specs

SpecRating
Part number000-14489-001
Traditional frequencies83 kHz Medium CHIRP, 200 kHz High CHIRP
SideScan and DownScan455 kHz and 800 kHz
Traditional max depth1,000 ft (305 m)
DownScan max depth300 ft (91 m)
SideScan range per side300 ft (91 m) at 455 kHz, 150 ft (46 m) at 800 kHz
Max speedTraditional 48 knots (55 mph); imaging 9 knots (10 mph)
OutputsTraditional sonar, SideScan, DownScan, temperature
Cable and plug25 ft (7.6 m), 9-pin
MountingTransom, flush step or jackplate
Operating temperature5°F to 131°F (-15°C to +55°C)
Storage temperature-22°F to 158°F (-30°C to +70°C)

455 or 800 kHz on the water

Lowrance says 800 kHz covers most situations, and its range is good enough that you don’t have to give up detail to see out wide. Switch to 455 kHz when you’re covering big flats or deeper water and want the full 300 ft each side. Keep the boat at or under 9 knots when imaging with the Lowrance Active Imaging 3-in-1 transom transducer. The CHIRP sonar keeps tracking bottom up to 48 knots on the run.

Display support and mounting

Lowrance says Active Imaging transducers need no extra module on its next-generation displays, and calls out the IPS screens on HDS LIVE and NSS evo3. The Elite FS is also built for it; Lowrance’s Elite FS page lists it as Active Imaging 3-in-1 ready. Older or entry-level displays may not support it, so send us your model if you’re unsure.

Mount it on the transom, a flush step or a jackplate, in clean water clear of strakes and prop wash. If you already run a separate CHIRP transducer, the Active Imaging 2-in-1 drops the sonar element. For a Ghost bow motor, see the Active Imaging 3-in-1 for Ghost. Everything else is in our Lowrance transducers section.

Questions

Is this the HD version?

No. This is the original Active Imaging 3-in-1 at 455/800 kHz. The HD models run up to 1.2 MHz and have their own listings.

Can I return the Lowrance Active Imaging 3-in-1 transom transducer?

Electronics are final sale at our shop. Check fit first and read our returns policy.

Email sales@trollingmotorsdirect.org with your boat, display and how you plan to mount it, and we’ll confirm this is the right transducer.

Related products

error: Content is protected !!