Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Lowrance Adapter Cable 9-Pin ducer To 7-Pin unit chirp XID

$43.00

Lowrance adapter 000-13977-001 for Airmar XID transducers. It lets a 9-pin XSONIC transducer plug into a legacy 7-pin echo sounder module or unit. Check both connectors before ordering.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns

Description

The Lowrance 9-pin to 7-pin XID adapter is for a specific job: plugging a 9-pin XSONIC transducer into a legacy 7-pin echo sounder module or display. Lowrance part number 000-13977-001. It’s listed as an adapter for Airmar XID transducers, which is the family Lowrance’s XSONIC transducers come from.

Where this adapter fits in a system

Lowrance’s newer transducers use a 9-pin plug, while older sonar modules and units were built with a 7-pin port. If you’ve bought a 9-pin XSONIC transducer and want to run it on that older 7-pin hardware, the Lowrance 9-pin to 7-pin XID adapter bridges the two. The transducer plugs into the 9-pin end and the 7-pin end goes into the module.

XID is Airmar’s transducer ID. An XID transducer carries information about itself that a compatible sounder can read, so the unit knows what’s connected. This adapter is made with those transducers in mind.

Before you order the 000-13977-001

  • Confirm the transducer is a 9-pin XSONIC (XID) model. The part number is usually printed on the cable near the plug.
  • Confirm the module or display has a 7-pin sonar port.
  • Make sure the module supports the frequencies and CHIRP type of the transducer. An adapter can’t make a module run a transducer it wasn’t designed for.
  • Going the other way, 7-pin transducer into a 9-pin display, you need the 7-pin to 9-pin adapter instead.

Fitting the Lowrance 9-pin to 7-pin XID adapter

Line up the keyed plugs, push straight in and hand-tighten the collars all the way. Don’t twist the cable to make a plug line up. Mount the joint in a dry place near the echo sounder module, off the floor of the compartment, and secure the cable on both sides so the connectors don’t carry weight.

On bigger boats the module often lives in a console or under a helm seat, a long way from the transom. Plan the full run before drilling or pulling cable, and leave a service loop at each end.

Learn more

For background on how sonar transducers and sounders work together, the Wikipedia fishfinder entry is a good primer. More cables and transducers are in our Lowrance transducers section, and our Lowrance fish finder guide covers the current displays if you’re thinking about replacing older gear.

Questions

Will this work with a non-XID transducer?

Lowrance lists it for Airmar XID transducers and XSONIC 9-pin models. For anything else, send us the transducer part number first.

Can I return the Lowrance 9-pin to 7-pin XID adapter?

Electronics are final sale at our shop. See our returns policy, and check both plugs before you buy.

Does it lose any sonar detail?

It passes the transducer’s signal through to the module. What you see still depends on what the module can do with that transducer.

Email sales@trollingmotorsdirect.org with your transducer and module part numbers, and we’ll confirm this is the right cable.

Related products

error: Content is protected !!