Description
The Lowrance Active Imaging 2-in-1 transducer adds SideScan and DownScan Imaging without replacing the CHIRP transducer you already like. Part 000-14490-001 is Lowrance’s stand-alone imaging transducer for dual transducer installs, with water temperature built in, a 25 ft (7.6 m) cable and a 9-pin connector.
Why choose the 2-in-1 over a 3-in-1
A 3-in-1 puts traditional sonar and imaging in one body. That’s tidy, but it means one transducer location has to do everything. Plenty of boats already have a good thru-hull or in-hull sonar transducer that reads bottom at speed or in deep water. The Lowrance Active Imaging 2-in-1 transducer leaves that alone and handles imaging only.
It also lets you choose the traditional sonar you want rather than the one built into a 3-in-1. Lowrance designed this model for exactly that kind of dual transducer setup.
Spec sheet
| Item | Lowrance rating |
|---|---|
| Part number | 000-14490-001 |
| Outputs | SideScan, DownScan, temperature |
| Frequencies | 455 kHz and 800 kHz |
| DownScan depth | 300 ft (91 m) |
| SideScan range per side | 300 ft (91 m) at 455 kHz, 150 ft (46 m) at 800 kHz |
| Imaging speed | Up to 9 knots (10 mph) |
| Cable | 25 ft (7.6 m), 9-pin connector |
| Mounting | Transom, flush step or jackplate |
| Operating / storage temperature | 5°F to 131°F / -22°F to 158°F |
What makes the Lowrance Active Imaging 2-in-1 transducer sharper
Separate SideScan transmit and receive elements let it ping faster, and faster pings mean a more detailed image. Those elements also push more signal to the sides, which helps range. The housing is a polymer that Lowrance says passes sound more like water, so less signal is lost. Lowrance points to the IPS screens on HDS LIVE and NSS evo3 as the way to see the full image, and says no extra module is needed on its next-generation displays.
Plan the second transducer
Two transducers need somewhere to plug in. Check whether your display has a second sonar input, or whether you’ll join them with a Y-cable. Lowrance sells this pairing as kits for the single sonar port on Elite Ti2 and Elite FS displays: the 2-in-1 with 83/200 skimmer and Y-cable, and an in-hull version. Mount the imaging transducer in clean water on the transom, step or jackplate, away from your existing transducer and out of prop wash.
Browse our Lowrance transducers for other options, and our Lowrance fish finder guide for displays that run Active Imaging.
Common questions
Will the Lowrance Active Imaging 2-in-1 transducer show regular 2D sonar?
No. It has no CHIRP or traditional sonar element. You’ll need a separate transducer for that view.
Can I return it?
Electronics are final sale at our shop. See our returns policy before you order.
Email sales@trollingmotorsdirect.org with your display and current transducer, and we’ll tell you how to wire the pair.









