Skip to content

Garmin · Lowrance · Humminbird trolling motors, live sonar and the mounts to rig them

Mon–Fri, 9am–6pmsales@trollingmotorsdirect.org

Lowrance HDS16 Pro 16in MFD C-Map US & Canada No Transducer

$4,799.99

The 16-inch Lowrance HDS PRO without a transducer, with C-MAP DISCOVER OnBoard US and Canada charts. Built to be the hub for sonar, radar, autopilot and trolling motor control. Model 000-16005-001.

  • Free ground shipping on orders of $199+ to the lower 48
  • Not sure it fits? Email us before you order
  • Warranty by the manufacturer · Returns
SKU: LOW00016005001
Category: , , ,

Description

Think of the Lowrance HDS16 PRO no transducer unit as the hub you build the rest of the boat around. It’s the 16-inch HDS PRO with C-MAP DISCOVER OnBoard charts for the US and Canada, sold without a transducer so you pick the sonar that suits your fishing. Lowrance’s part number is 000-16005-001.

One screen for the whole boat

Lowrance built the HDS PRO to control a lot more than sonar. From this screen you can run:

  • Trolling motor: a Lowrance Ghost, including Ghost 360, Orbit Waypoint and Anchor at a Distance. MotorGuide Xi5 and Xi3 need the MotorGuide PinPoint Gateway.
  • Anchors: Power-Pole shallow water anchors, from the touchscreen.
  • Autopilot: NAC-1, NAC-2, NAC-3 and Lowrance Outboard Pilot.
  • Radar and AIS: all HALO radars, with AIS targets overlaid on the chart and radar.
  • Weather and audio: SiriusXM through the WM-4 module (USA only).

Lowrance’s HDS PRO page calls this bow-to-stern control, and on a 16-inch 1920 x 1080 screen there’s room to keep the chart up while you use it.

Ports and connections

ConnectionWhat the HDS16 PRO has
Ethernet2 x 100 Mbit, up to 6 displays per network
NMEA 20001 Micro-C port
NMEA 0183Through the power cable
Video inHDMI 1.4 (HDCP), composite via adapter
Video outNone
WirelessWi-Fi b/g/n, Bluetooth 5.2

Picking the sonar

Built in, the unit handles dual-channel CHIRP, ActiveTarget 2 and Active Imaging HD. Add-on modules it supports include the S3100, S5100, StructureScan, StructureScan 3D and SonarHub. If you want FishReveal on SideScan, the S3100 is the module that adds it.

If you want one transducer to start with, the Active Imaging HD 3-in-1 covers CHIRP, DownScan and SideScan on its own. For live sonar, the ActiveTarget 2 system plugs straight in, and the Lowrance HDS16 PRO no transducer unit can run two of them.

Building the NMEA 2000 side

Radar overlay and steady chart orientation need a heading source. The Point-1 GPS antenna gives heading over NMEA 2000, and the N2K-EXP-RD-2 starter kit covers the backbone if the boat doesn’t have one yet.

Lowrance HDS16 PRO no transducer questions

Can I send the picture to a second screen?

Not by video. The HDS PRO has no video output. Add a second HDS PRO on Ethernet instead.

What fuse does it need?

Lowrance recommends a 5 A fuse. Typical draw is 3.0 A and max is 4.1 A at 13 V.

Can it be returned?

No. Electronics are final sale (see our returns page).

Planning a full system? Email sales@trollingmotorsdirect.org with your boat and the gear you want on it, and we’ll help you check the Lowrance HDS16 PRO no transducer unit ties it together. More sizes are in Lowrance graphs.

Related products

error: Content is protected !!