Description
The Lowrance HST-DFSBL transducer is a straightforward depth and temperature sensor for the transom: dual-frequency 50/200 kHz sonar from one broadband ceramic element, on a cable with a blue connector. Lowrance recommends it for the SonarHub sounder module and for Simrad NSS evo2 and NSS sport displays.
What the two frequencies do
At 50 kHz the beam is 29 degrees wide and reaches as deep as 900 m (3000 ft), so that’s your deep-water channel. At 200 kHz the beam narrows to 12 degrees, which gives cleaner fish arches and bottom detail in shallower water. Both come from a single internal ceramic, so there’s one transducer to mount and one cable to run. The fishfinder article on Wikipedia explains why lower frequencies reach deeper.
Most displays and sounder modules let you run both channels at once on a split screen: 50 kHz to hold the bottom in deep water, 200 kHz for detail when you’re over a hump or a ledge.
This is a traditional sonar transducer. It doesn’t do DownScan, SideScan or live sonar, so plan on a separate transducer if you want those views.
HST-DFSBL specs
| Spec | Detail |
|---|---|
| Frequencies | 50/200 kHz |
| Beam width | 29 degrees at 50 kHz, 12 degrees at 200 kHz |
| Max depth | 900 m (3000 ft) at 50 kHz |
| Element | 1 internal broadband ceramic |
| Sensors | Depth and water temperature |
| Housing | Plastic, transom mount |
| Connector | Blue |
| In the box | Transducer and mounting kit |
Boats the HST-DFSBL suits
The plastic housing is rated for transom mounting on any hull. The spec sheet pitches the Lowrance HST-DFSBL transducer at outboard and I/O boats up to 8 m (the same sheet also lists 20 ft), and transom mounts in general work well on planing hulls.
Transom units are the easiest kind to install and service. The bracket adjusts for your transom angle, and you can reach the transducer with the boat on the trailer. Pick a spot where water flows clean at speed, away from strakes, rivets and the prop, and follow the angle setting in the instructions.
Lowrance HST-DFSBL transducer questions
Will it work with my Lowrance display?
Lowrance recommends it for SonarHub and the Simrad NSS evo2 and NSS sport. Whether it plugs into a given display depends on that unit’s sonar port, so send us the model before you order.
Does it read water temperature?
Yes. Depth and temperature come through the same cable, so you only make one connection at the display or module.
Is it returnable?
Transducers count as electronics, and electronics are final sale (see returns).
Email sales@trollingmotorsdirect.org with your display or sounder module and your boat, and we’ll confirm the Lowrance HST-DFSBL transducer is a match. For imaging and live sonar options, browse Lowrance transducers.









